Reebok Rl 1500 Elliptical User Manual - Page 11
Attach the Water Bottle Holder 26 to the Frame
View all Reebok Rl 1500 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
10. While a second person holds the Console (74) near the Upright (2), connect the wires on the 10 Console to the Pulse Jumper Wire (76) and to Avoid pinching 74 the Upper Wire Harness (77). the wires Insert the excess wire into the Upright (2) or into the Console (74). Tip: Avoid pinching the wires. Attach the Console (74) to the Upright (2) with four M4 x 16mm Screws (47). 2 47 77 76 11. Attach the Water Bottle Holder (26) to the Frame (1) with two M4 x 22mm Screws (57). 11 1 26 57 12. Make sure that all parts of the elliptical are properly tightened. Cover the floor beneath the elliptical to protect the floor from damage. Note: Some extra hardware may be left over. 11
11
10. While a second person holds the Console (74)
near the Upright (2), connect the wires on the
Console to the Pulse Jumper Wire (76) and to
the Upper Wire Harness (77).
Insert the excess wire into the Upright (2) or into
the Console (74).
Tip: Avoid pinching the wires.
Attach the
Console (74) to the Upright (2) with four M4 x
16mm Screws (47).
10
2
47
77
76
74
11. Attach the Water Bottle Holder (26) to the Frame
(1) with two M4 x 22mm Screws (57).
11
1
26
57
12.
Make sure that all parts of the elliptical are properly tightened.
Cover the floor beneath the elliptical to
protect the floor from damage. Note: Some extra hardware may be left over.
Avoid pinching
the wires