Reebok Rl 1500 Elliptical User Manual - Page 13
Electrode Areas - instructions
View all Reebok Rl 1500 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
• If the chest pulse sensor still does not function properly, test the chest pulse sensor in the following way: Hold the chest pulse sensor and place your thumbs over the electrode areas as shown. Electrode Areas Next, hold the chest pulse sensor near the console. While holding one thumb stationary, begin tapping the other thumb against the electrode area at a rate of about one tap per second. Check the heart rate reading on the console. • If the chest pulse sensor does not function properly after you have followed all of the above instructions, replace the battery in the following way: Locate the battery cover on the back of the sensor unit. Insert a coin into the slot in the cover, turn the cover counterclockwise, and remove the cover. Remove the old battery and insert a new CR 2032 battery. Make sure that the battery is turned so the writing is on top. Reattach the battery cover and turn it clockwise to close it. CR 2032 Battery 13