Reebok Rl 1500 Elliptical User Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tool(s), assembly requires a Phillips screwdriver wrench . and an adjustable See the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has been preassembled. To avoid damaging parts, do not use power tools for assembly. M8 Small Washer (18)-4 M10 Split Washer (85)-20 Wave Washer (88)-4 M10 Washer (67)-14 M8 Washer (69)-4 M4 x 16mm Screw (47)-4 M4 x 22mm Screw (57)-2 M8 x 19mm Button Screw (56)-4 M8 Locknut (72)-4 M10 Locknut (70)-2 M8 x 38mm Button Bolt (58)-4 M8 x 55mm Bolt Set (92)-2 M10 x 13mm Button Screw (54)-14 M10 x 25mm Patch Screw (48)-4 M10 x 65mm Bolt Set (94)-2 M10 x 116mm Carriage Bolt (38)-2 M10 x 123mm Button Screw (87)-2 5 Thrust Washer (66)-4