Reebok Rl 1500 Elliptical User Manual - Page 6
mm Patch Screws 48 and four M10 Split
View all Reebok Rl 1500 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1. To make assembly easier, read the 1 information on page 5 before you begin. Attach the Stabilizer (8) to the Frame (1) with two M10 x 116mm Carriage Bolts (38) and two M10 Locknuts (70). 38 8 2. While a second person hold the Upright (2) near the Frame (1), connect the Upper Wire Harness (77) to the Lower Wire Harness (78). Tip: Avoid pinching the wires. Attach the Upright (2) to the Frame (1) with four M10 x 25mm Patch Screws (48) and four M10 Split Washers (85). 2 2 Avoid pinching the wires 85 48 85 1 70 77 78 48 85 1 6
6
1.
Attach the Stabilizer (8) to the Frame (1) with
two M10 x 116mm Carriage Bolts (38) and two
M10 Locknuts (70).
2.
While a second person hold the Upright (2) near
the Frame (1), connect the Upper Wire Harness
(77) to the Lower Wire Harness (78).
Tip: Avoid pinching the wires.
Attach the
Upright (2) to the Frame (1) with four M10 x
25mm Patch Screws (48) and four M10 Split
Washers (85).
1
1
2
48
85
78
2
Avoid pinching
the wires
1
70
38
8
77
85
48
85
To make assembly easier, read the
information on page 5 before you begin.