Ricoh Aficio MP C3500 EFI Operating Instructions - Page 35
Settings Required to Use Scan to Folder Function
View all Ricoh Aficio MP C3500 EFI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Network Settings Note ❒ For the Effective Protocol setting, check that the protocol you want to use is set to [Active]. ❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in- 1 terface takes precedence. ❒ When POP before SMTP is set to [On], you must also make settings for Reception Protocol and POP3 / IMAP4 Settings. ❒ When setting POP before SMTP to [On], check POP3 port number in E-mail Communication Port. Reference p.59 "Interface Settings" p.69 "File Transfer" Settings Required to Use Scan to Folder Function This section lists the settings required for sending files. Ethernet This section lists the settings required for sending files with an Ethernet connection. For details about how to specify the settings, see "Interface Settings" and "File Transfer". Menu User Tool Interface Settings/Network Machine IPv4 Address Interface Settings/Network IPv4 Gateway Address Interface Settings/Network DNS Configuration Interface Settings/Network DDNS Configuration Interface Settings/Network Domain Name Interface Settings/Network WINS Configuration Setting Requirements Necessary Necessary As required As required As required As required Interface Settings/Network Effective Protocol Necessary Interface Settings/Network Ethernet Speed As required Interface Settings/Network LAN Type Interface Settings/Network Permit SNMPv3 Communication Interface Settings/Network Permit SSL/TLS Communication Interface Settings/Network Host Name File Transfer Scanner Resend Interval Time File Transfer Number of Scanner Resends Necessary As required As required As required As required As required 25