Ricoh C220N Operating Instructions - Page 58
Loading Paper in the Bypass Tray, Stop/Start
UPC - 026649060052
View all Ricoh C220N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Paper and Other Media Loading Paper in the Bypass Tray Important ❒ Set the size and direction of the loaded paper using Smart Organizing Monitor or the printer driver. Make sure the settings do not conflict. Otherwise, the paper may jam or the print quality may be affected. ❒ Load paper with the print side down and in the short-edge feed direction. ❒ Duplex printing is not possible. ❒ You cannot use the bypass tray to feed in paper that requires a specified printing position (such as preprinted paper). Use Tray 1 for such paper. ❒ If paper is curled, straighten it before loading, by bending it the paper in the 4 opposite direction to the curl, for example. ❒ Do not load paper while the printer is printing. ❒ Tray 1 and 2 are unavailable while paper is being loaded in the Bypass Tray. ❒ You cannot load paper when the printer is in Energy Saver mode. To disable Energy Saver mode, click the {Stop/Start} key one the control panel. A Insert the top edge of the paper into the printer. ASH057S B Adjust the paper guides to the paper size. 48 ASH058S