Ricoh GX5050N User Guide - Page 109
Cannot use Low Temp./Power Off
UPC - 026649055218
View all Ricoh GX5050N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Troubleshooting Reset Cartridge No print cartridge has been installed. Install the print cartridge correctly. See p.126 "Cover Open / Print Cartridge(s) Not Detected". Dry Waiting... The ink on the printed OHP transparency is being allowed to dry. Waiting... Wait a moment. Energy Saver The printer is in Energy Saver mode. The printer is ready for use. Cannot use High Temp./Power Off On The temperature is abnormally high. Switch the printer off and then on. If the message reappears, contact your service representative. See p.131 "Out of Printable Temperature Range". Cannot use Low Temp./Power Off On The temperature is abnormally low. Switch the printer off and then on. If the message reappears, contact your service representative. See p.131 "Out of Printable Temperature Range". Resetting Job... The printer is reinitializing a print job. Wait a moment. Setting change The printer is changing its settings. Wait a moment. Load Paper:Tray# or Form Feed The selected tray has run out of paper. Reload the tray. Alternately, press the [Form Feed] key, select a different tray, and then print. To cancel the print job, press the [Job Reset] key. See p.112 "No Paper/Tray Not Detected (Tray 1)", p.119 "Paper Size Mismatch/Paper Type Mismatch (Tray 2)", p.116 "No Paper/Tray Not Detected (Bypass Tray)". Change Setting Tray #/ The size of paper in the selected tray does not match the specified paper size. Load the tray with paper of the specified size, and then change the paper size setting for the tray on the control panel. Alternately, press the [Form Feed] key, select a tray containing paper of the specified size, and then print. To cancel the print job, press the [Job Reset] key. See p.117 "Paper Size Mismatch/Paper Type Mismatch (Tray 1)", p.119 "Paper Size Mismatch/Paper Type Mismatch (Tray 2)", p.121 "Paper Size Mismatch/Paper Type Mismatch (Bypass Tray)". 109