Ricoh MP161SPF Operating Instructions - Page 47

Sending scan files to NetWare server, Preparation for Sending by Scan to Folder

Page 47 highlights

Sending scan files to NetWare server Before Sending Scan Files by Scan to Folder 2 1. This machine You can send scan files to NetWare folders. To send scan files to NetWare folders, use the NCP protocol. 2. NetWare server You can use this server to share files over the network via NetWare. By sending image data to the server, images can be stored on the server. ZZZ511S 3. Client computer To download images, a computer must be running the NetWare client and be logged onto the server. Preparation for Sending by Scan to Folder This section explains the preparation and settings for sending scan files by Scan to Folder. Important ❒ Files can be sent to shared folders on client computers. ❒ Files can also be sent to FTP servers if any exist on the network. ❒ Files can also be sent to NetWare servers if any exist on the network. A Connect the machine to the network. Connect the machine to the network using an Ethernet cable or wireless LAN (IEEE 802.11b). B Make the necessary network settings in [System Settings]. If you have connected the machine to the network using an Ethernet cable, make the following settings. For details, see General Settings Guide. • Specify the machine's IPv4 address and subnet mask. • Specify the IPv4 gateway address. • In [Effective Protocol], enable [IPv4]. • To send files to shared folders, enable [SMB] in [Effective Protocol]. To send files to NetWare folders, enable [NetWare] in [Effective Protocol]. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128

Before Sending Scan Files by Scan to Folder
41
2
Sending scan files to NetWare server
1.
This machine
You can send scan files to NetWare fold-
ers. To send scan files to NetWare fold-
ers, use the NCP protocol.
2.
NetWare server
You can use this server to share files over
the network via NetWare. By sending im-
age data to the server, images can be
stored on the server.
3.
Client computer
To download images, a computer must
be running the NetWare client and be
logged onto the server.
Preparation for Sending by Scan to Folder
This section explains the preparation and settings for sending scan files by Scan to Folder.
Important
Files can be sent to shared folders on client computers.
Files can also be sent to FTP servers if any exist on the network.
Files can also be sent to NetWare servers if any exist on the network.
A
Connect the machine to the network.
Connect the machine to the network using an Ethernet cable or wireless LAN
(IEEE 802.11b).
B
Make the necessary network settings in
[
System Settings
]
.
If you have connected the machine to the network using an Ethernet cable,
make the following settings. For details, see General Settings Guide.
Specify the machine’s IPv4 address and subnet mask.
Specify the IPv4 gateway address.
• In
[
Effective Protocol
]
, enable
[
IPv4
]
.
To send files to shared folders, enable
[
SMB
]
in
[
Effective Protocol
]
. To send
files to NetWare folders, enable
[
NetWare
]
in
[
Effective Protocol
]
.
ZZZ511S