Ricoh P C301W Users Guide - Page 119
and [IKE Settings]., Prefix Length
View all Ricoh P C301W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Configuring the IPsec Settings Item Status Description Displays the status of the IPsec policy as "Active" or "Inactive". To configure IPsec policies, select the desired IPsec policy, and then click [Change] to open the "IPsec Policy Settings" page. The following settings can be made on the "IPsec Policy Settings" page. IP Policy Settings Item Description No. Specify a number between 1 and 10 for the IPsec policy. The number you specify will determine the position of the policy in the IPsec Policy List. Policy searching is performed according to the order of the list. If the number you specify is already assigned to another policy, the policy you are configuring will take the number of the earlier policy, and the earlier policy and any subsequent policies will be renumbered accordingly. Activity Select whether to enable or disable the policy. Name Enter the name of the policy. Can contain up to 16 characters. Address Type Select IPv4 or IPv6 as the type of IP address to be used in IPsec communication. Local Address Displays the IP address of this printer. Remote Address Enter the IPv4 or IPv6 address of the device with which to communicate. Can contain up to 39 characters. Prefix Length Enter the prefix length of the Remote Address, using a value between 1 and 128. If this setting is left blank, "32" (IPv4) or "128" (IPv6) will be automatically selected. Action Specify how the IP packets are processed from the following: • [Allow]: IP packets are both sent and received without IPsec applied to them. • [Drop]: IP packets are discarded. • [Require Security]: IPsec is applied to IP packets that are both sent and received. If you have selected [Require Security], you must configure [IPsec Settings] and [IKE Settings]. 117