Ricoh SP 4510DN User Guide - Page 76
Cannot connect=>Comm.Serv., Updating the @Remote
View all Ricoh SP 4510DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
3. Troubleshooting Message "@Remote Cert. update failed" Cause Updating the @Remote certificate failed. "Cannot connect=>Comm.Serv. Check proxy user/password." The proxy user name or password is incorrect. "Cannot connect with DHCP server. (101/201)" "Cannot connect with NetWare print server. (107/207)" "Cannot connect with NetWare server.(106/206)" "Cannot print." An IP address cannot be obtained from the DHCP server. No connection with the NetWare print server is available. No connection with the NetWare print server is available. The printer cannot print the sent data. "Change (Tray name) to the following settings:" The size of the paper in the tray does not match the paper size specified in the printer driver. "Check network settings.(103/203)" The IP address setting is incorrect. "Classification Code Error" A classification code is not specified for the print job. Solution Turn the printer off, and then turn it on again. If the problem persists, contact your sales or service representative. Check the proxy server settings, and then change the user name and/or password if they are incorrect. Contact your network administrator. Contact your network administrator. Contact your network administrator. Check that the file you want to print is a supported file type. Check the misfeeds and ask your network administrator for help. Select a tray containing paper that is the same size as the specified paper size. Check the IP address, subnet mask, and gateway address. Enter a classification code using the printer properties and print the document again. 74