Ridgid WD1956 Owners Manual - Page 12
Accessory and Storage, Operation continued
View all Ridgid WD1956 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
SP6731-1 16 Gallon E S 2/3/12 2:06 PM Page 12 Operation (continued) 1. Locate blowing port of your Vac. 2. Insert the locking end of the DualFlex™ Locking Hose into the blowing port of the Vac. The hose should snap into place. To remove the hose from the Vac, press the release button in the hose assembly and pull the hose out of the Vac inlet. 3. (Optional) Attach extension wand to opposite end of hose, then place the car nozzle on the wand. 4. Turn Vac on and you are ready to use your Vac as a blower. Dual-Flex Locking Hose Extension Wand (Optional) Accessory and Storage Your accessories may be stored in the removable tote, or in the two locations on the caddy right/left. Either the hose or the wands may be stored in the two areas marked Hose Storage. The hose may be stored by wrapping it around the unit and plugging the open end into one of the storage locations on the caddy assembly. Alternatively, the wands may also be stored in this location by plugging either of the ends of the wands onto the storage receivers located on the caddy. Blowing Port Swivel End of Hose Car Nozzle (Optional) Accessory Storage Compartment Extension Wand Storage HStoosreage SH toroasgee Hose Storage 12 Area