Rocketfish RF-TVMP20 User Manual (English) - Page 12
Option 2: Installing on a solid concrete wall
View all Rocketfish RF-TVMP20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
RF-TVMP20 TV Wall Mount STEP 5 - Option 2: Installing on a solid concrete wall 1 Align the wall plate (A) at the height you determined in the previous step and make sure that it is level. Use a pencil to mark the lag bolt hole locations (2). Remove the wall plate. 2 Drill pilot holes to a depth of 2-3/4 in. (7 mm) using a 3/8 in. (10 mm) diameter masonry drill bit. 3 Insert the concrete wall anchors (W-B) into the pilot holes and use a hammer to make sure the anchors are flush with the concrete surface. 4 Align the wall plate (A) with the anchors, insert the lag bolts (W-A) through the holes in the wall plate, then tighten the lag bolts only until they are firm against the wall plate. CAUTION: Avoid potential injuries or property damage! DO NOT over-tighten the lag bolts (W-A). 2-3/4 in. (70 mm) W-B A W-A You'll need W-A (2) Level W-B (2) 3/8" masonry drill bit Edge-to edge A Wall stud finder Drill plate 1/2" socket wrench Pencil Hammer 12 Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)