Rocketfish RF-TVMP20 User Manual (English) - Page 6

RF-TVMP20 TV Wall Mount STEP 2 - Determining your mounting configuration 1 Carefully place your TV screen face down on a cushioned, clean surface to protect the screen from damage and scratches. 2 If your TV has a table top stand attached, remove the stand. See the documentation that came with your TV for instructions. 3 Temporarily hold the flat surface of the arm assembly (B) against the back of your TV. 4 Identify the type of mounting configuration by determining if your arm assembly (B) lines up with the screw holes on the back of your TV or if you will need to install the adapters (C). 5 Remove the arm assembly. 100mm (3-15/16") 75mm (2-15/16") 100mm (3-15/16") 75mm (2-15/16") 75 x 75mm 100 x 100 mm 100mm (3-15/16") 100 x 200 mm 200mm (7-7/8") 200 x 200 mm 200mm (7-7/8") 200mm (7-7/8") 200mm (7-7/8") 100mm (3-15/16") 200 x 100 mm For 75 x 75mm or 100 x 100 mm mounting configurations, go to "STEP 3: Option 1- Attaching the arm assembly without the adapters" on page 7. -OR- For a 100 x 200 mm, 200 x 200 mm, or 200 x 100 mm configuration, go to "STEP 3: Option 2 - Attaching the adapters to the arm assembly" on page 8. 6 Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)