Rocketfish RF-TVMP20 User Manual (English) - Page 2
Safety information and specifications, Tools needed, RF-TVMP20, TV Wall Mount
View all Rocketfish RF-TVMP20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
RF-TVMP20 TV Wall Mount Safety information and specifications IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS CAUTION: Do not use this product for any purpose not explicitly specified by Rocketfish. Maximum TV weight: 20 lbs. (9.1 kg) Minimum TV weight: 7 lbs. (3.2 kg) Maximum TV Screen size: 32 in. diagonal Improper installation may cause Overall dimensions (W × H ): property damage or personal injury. If you do not understand these directions, or have doubts about the safety of the installation, contact Customer 2.9 x 7.2 in. (7.3 x 18.3 cm) Wall-mount weight: 5 lbs. (2.27 kg) Service or call a qualified contractor. Rocketfish is not We're here for you responsible for damage or injury caused by incorrect installation or use. The included hardware is designed for use on vertical walls constructed of wood studs or solid concrete. A wood stud wall is defined as consisting of a minimum of 2x4 wooden www.rocketfishproducts.com For customer service, call: 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico) studs (2" wide by 4" deep) with a maximum of 5/8" drywall. The included hardware is not designed for use with metal studs or cinderblock walls. If you're uncertain about the construction of your wall, then please consult a qualified contractor or installer for assistance. For a safe installation, the wall you are mounting to must support 4 times the weight of the total load. If not, then the surface must be reinforced to meet this standard. The installer is responsible for verifying that the wall structure and hardware used in any installation method will safely support the total load. The weight of your TV must not exceed 20 lbs. (9.1 kg). Rocketfish recommends that the wall be capable of supporting five times the weight of your TV and wall mount combined, or approximately 125 lbs. (57 kg). This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children! Tools needed You will need the following tools to assemble your new TV wall mount: Edge-to-edge stud finder Pencil Level Phillips screwdriver Measuring tape 7/32" (5.5 mm) wood drill bit for wood stud wall OR 3/8" (9.5 mm) masonry drill bit (concrete only) Socket wrench with 1/2" (13 mm) socket or adjustable wrench Drill Hammer 2 Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)