Samsung 275C User Manual - Page 52
ESC u, ESC v
View all Samsung 275C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
ESC u [Name] [Format] [Range] [Description] [Notes] Transmit peripheral device status ASCII ESC u n Hex 1B 75 n Decimal 27 117 n n = 0, 48 Transmits the peripheral device status of 1 byte. • The peripheral device status to be transmitted is as follows: Bit Binary Hex 0 0 1 1-3 - - 4 0 00 5,6 - - 7 0 00 Decimal 0 0 Status Drawer kick-out connector pin 3 is LOW. Drawer kick-out connector pin 3 is HIGH. Undefined. Not used. Fixed to Off. Undefined. Not used. Fixed to Off. ESC v [Name] [Format] [Description] [Notes] Transmit paper sensor status ASCII ESC v Hex 1B 76 Decimal 27 118 Transmits the status of paper sensor(s) as 1 byte of data. • The paper sensor status to be transmitted is as follows: Bit Binary Hex Decimal Status 0,1 00 00 11 03 0 Paper near end sensor: paper adequate. 3 Paper near end sensor: paper near end. 2,3 00 00 11 0C 4 0 00 5,6 - - 7 Off 00 00 Paper end sensor: paper present. 12 Paper end sensor: paper not present. 0 Not used. Fixed to Off. - Undefined. 0 Not used. Fixed to Off. ESC { [Name] [Format] [Range] [Default] [Description] Turn upside-down printing mode on/off ASCII ESC { n Hex 1B 7B n Decimal 27 123 n 1 ≤ n ≤ 255 n = 0 Turns upside-down printing mode on or off. - When the LSB of n is 0, upside-down printing mode is turned off. - When the LSB of n is 1, upside-down printing mode is turned on. 4-16