Samsung BD-D5300 User Manual (user Manual) (ver.1.0) (English) - Page 34

Setup To enter the Network settings into your player, follow these steps: 1. Follow Steps 1 through 5 in the 'Setting Up the Wireless Network Connection - Auto' procedure. 2. When done, press the buttons to move the cursor to Done, and then press the ENTER button. The Network Status screen appears. Settings Display Audio Network System Language Security General Support IP Mode IP Address Subnet Mask Gateway DNS Mode DNS Server IP Settings Manual 0.0.0.0 0.0.0.0 0.0.0.0 Manual 0.0.0.0 OK > Move " Enter ' Return 3. On the Network Status screen, select Cancel, and then press Enter. 4. Press the ◄► buttons to select IP Settings, and then press the ENTER button. 5. Press the ENTER button to select IP Mode. 6. Press the ▲▼ buttons to select Manual, and then press the ENTER button. 7. Press the ▼ button to go to the first entry field (IP Address). 8. Use the number buttons to enter numbers. 9. When done with each field, press the ► button to move successively to the next field. You can also use the other arrow buttons to move up, down, and back. 10. Enter the IP Address, Subnet Mask, and Gateway values. 11. Press the ▼ to go to DNS Mode. 12. Press the ▼ button to go to the first DNS entry field. Enter the numbers as above. 13. The Network Status screen appears. The player connects to the network after the network connection is verified. WPS(PBC) The easiest way to set up the wireless network connection is using the WPS(PBC) function or the One Foot Connection function. If your wireless router has a WPS(PBC) button, follow these steps: 1. Press the ▲▼ buttons to select WPS(PBC). Settings Display Network Settings Select a network connection type. Audio Network System Wired Language Wireless (general) Security WPS(PBC) General One Foot Support Connection Connect to the Access Point easily by pressing the WPS(PBC) button. Choose this if your Access Point supports Push Button Configuration(PBC). > Move " Enter ' Return 2. Press the ENTER button. 3. Press the WPS(PBC) button on your router within two minutes. Your player displays the Network Selection Screen, and automatically acquires all the network settings values it needs and connects to your network. When it is done, it displays an OK button. Press the ENTER button on your remote. One Foot Connection You can set up the wireless connection automatically if you have a Samsung Wireless Router which supports One Foot Connection. To connect using the One Foot Connection function, follow these steps: 1. Press the ▲▼ buttons to select One Foot Connection. Settings Display Network Settings Select a network connection type. Audio Network System Wired Language Wireless (general) Security WPS(PBC) General One Foot Support Connection Connect to the wireless network automatically if your Access Point supports One Foot Connection. Select this connection type after placing the Access Point within 10 inches (25Cm) of product. > Move " Enter ' Return 34 English