Samsung CLP-320N User Guide - Page 38

-Turn off the firewall and Search again. For Window operating system, click Start > Control Panel > Windows Firewall, and inactivate this option. For other operating system, refer to its on-line guide. -Turn off the firewall from the third party's program beside the operating system. Refer to the manual provided by individual programs. •Direct Input The Direct Input allows you to search a specific machine on the network. -Search by IP address: Enter the IP address or the host name. Then click Next. To verify your machine's IP address, print a network configuration report (See "Printing a machine report" on page 72). -Search by network path: To find a shared machine (UNC Path), enter the shared name manually or find a shared printer by clicking the Browse button. Then click Next. •Help If your machine is not connected to the computer or network, This help button gives you the detailed information about how to connect the machine. 5. The searched machines will be shown on the screen. Select the one you wish to use and click Next. If the driver searched only one machine, the confirmation window appears. 6. After the installation is finished, a window asking you to print a test page appears. If you want to print a test page, click Print a test page. Otherwise, just click Next and skip to step 8. 7. If the test page prints out correctly, click Yes. If not, click No to reprint it. 8. If you want to register your machine on Samsung website, click On-line Registration. If your machine is not connected yet to the computer, click How to connect?. How to connect? gives detailed information about how to connect the machine. Follow the instructions in the window. 9. Click Finish. •After the driver setup, you may enable firewall. •If the printer driver does not work properly, follow the steps below to repair or reinstall the driver. a)Make sure that the machine is connected to your machine and powered on. b)From the Start menu, select Programs or All Programs > Samsung Printers > your printer driver name > Maintenance. c)Select the option as you wish, follow the instruction on the window. Macintosh 1. Make sure that the machine is connected to your network and powered on. Also, your machine's IP address should have been set. 2. Insert the supplied software CD into your CD-ROM drive. 3. Double-click the CD-ROM icon that appears on your Macintosh desktop. 4. Double-click the MAC_Installer folder. 5. Double-click the Installer OS X icon. 6. Enter the password and click OK. 7. The Samsung Installer window opens. Click Continue. 8. Read the license agreement and click Continue. 9. Click Agree to agree to the license agreement. 10. Select Easy Install and click Install. Easy Install is recommended for most users. All components necessary for machine operations will be installed. •If you select Custom Install, you can choose individual components to install. 11. The message which warns that all applications will close on your computer appears. Click Continue. 12. Select the installation type you want and click OK. •Typical installation for a local printer: Installs default components for a device that is directly connected to user's computer. •Typical installation for a network printer: Installs software for a device that is on the network. The SetIP program automatically runs. If the machine has already configured network information, close the SetIP program. Go to the next step. •Wireless Setting and Installation : For CLP-325W(K)/CLP-326W, you can access Wireless Setting and Installation menu. The Wireless Setting and Installation allows you to install a wireless network to connect to the machine with USB cable (See "Setting a wireless network with USB cable" on page 41). 13. Follow the instructions on the screen to complete the installation. After the installation is finished, click Quit or Restart. 14. Open the Applications folder > Utilities > Print Setup Utility. •For Mac OS X 10.5~10.6, open the Applications folder > System Preferences and click Print & Fax. 15. Click Add on the Printer List. •For Mac OS X 10.5~10.6, click the "+" icon; a display window will pop-up. 16. For Mac OS X 10.3, select the IP Printing tab. •For Mac OS X 10.4, click IP Printer. •For Mac OS X 10.5~10.6, click IP. 17. Select Socket/HP Jet Direct in Printer Type. When printing a document containing many pages, printing performance may be enhanced by choosing Socket for Printer Type option. 18. Enter the machine's IP address in the Printer Address field. 19. Enter the queue name in the Queue Name field. If you cannot determine the queue name for your machine server, try using the default queue first. 20. For Mac OS X 10.3, if Auto Select does not work properly, select Samsung in Printer Model and your machine name in Model Name. •For Mac OS X 10.4, if Auto Select does not work properly, select Samsung in Print Using and your machine name in Model. •For Mac OS X 10.5~10.6, if Auto Select does not work properly, select Select a driver to use... and your machine name in Print Using. Your machine appears on the Printer List, and is set as the default machine. 21. Click Add. If the printer driver does not work properly, uninstall the driver and reinstall it. Follow steps below to uninstall the driver for Macintosh. a)Make sure that the machine is connected to your computer and powered on. b)Insert the supplied software CD into your CD-ROM drive. Network setup (CLP-320N(K)/CLP-321N/CLP-325W(K)/CLP-326W only)_ 38 Downloaded from www.Manualslib.com manuals search engine