Samsung CLP-320N User Guide - Page 48
Completing the installation, Turning the Wi-Fi network on/off, Troubleshooting
View all Samsung CLP-320N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
1.Check whether or not the network cable is connected to the machine. If not, connect the machine with a standard network cable. 2.Start a web browser such as Internet Explorer, Safari or Firefox and enter your machine's new IP address in the browser window. For example, 3.Click on Login on the upper right of the SyncThru™ Web Service website. A log-in page appears. 4.Type in the ID and Password then click on Login. If it's your first time logging into SyncThru™ Web Service, type in the below default ID and password. •ID: admin •Password: sec00000 5.When the SyncThru™ Web Service window opens, click on Network Settings. 6.Click on Wireless > Wizard. Wizard will help you setup the wireless network configuration. However, if you want to set the wireless network directly, select Custom. 7.Select the one Network Name(SSID) in the list. •SSID: SSID (Service Set Identifier) is a name that identifies a wireless network, access points, and wireless devices attempting to connect to a specific wireless network must use the same SSID. The SSID is case-sensitive. •Operation Mode: Operation Mode refers to the type of wireless connections (See "Wireless network name and network key" on page 40). -Ad-hoc: Allows wireless devices to communicate directly with each other in a peer-to-peer environment. -Infrastructure: Allows wireless devices to communicate with each other through an access point. If your network's Operation Mode is Infrastructure, select the SSID of the access point. If the Operation Mode is Ad-hoc, select the machine's SSID. Note that "portthru" is the default SSID of your machine. 8.Click on Next. If the wireless security setting window appears, enter the registered password (network key) and click on Next. 9.The confirmation window appears, please check your wireless setup. If the setup is right, click on Apply. Disconnect the network cable (standard or network). Your machine should then start communicating wirelessly with the network. In case of Ad-hoc mode, you can use a wireless LAN and wired LAN simultaneously. Completing the installation After you have installed your Samsung wireless network printer, print another copy of the Network Configuration Report and keep it for future reference. You are now ready to use your new Samsung wireless printer on your network. If the wireless network seems to not be working, set all the network setting to the factory defaults and try again (See "Restoring factory default settings using SyncThru™ Web Service" on page 36). Turning the Wi-Fi network on/off You can turn the Wi-Fi network on/off with SyncThru™ Web Service. The factory default is on. To turn default mode, follow the following steps: 1. Check whether the network cable is connected to the machine. If not, connect the machine with a standard network cable. 2. Start a web browser such as Internet Explorer, Safari or Firefox and enter your machine's new IP address in the browser window. For example, 3. Click on Login on the upper right of the SyncThru™ Web Service website. A log-in page appears. 4. Type in the ID and Password then click on Login. If it's your first time logging into SyncThru™ Web Service, type in the below default ID and password. •ID: admin •Password: sec00000 5. When the SyncThru™ Web Service window opens, click on Network Settings. 6. Click on Wireless > Custom. You can also turn the Wi-Fi network on/off. Troubleshooting Solving problems that might occur during setting up the wireless setting and installing the machine driver Printers Not Found •Your machine may not be turned on. Turn on your computer and the machine. •USB cable is not connected between your computer and machine. Connect machine to your computer using the USB cable. •The machine does not support a wireless network. Check the machine's user's guide included on the software CD supplied with your machine and prepare a wireless network machine. Connecting Failure - Not Found SSID •The machine is unable to search the network name (SSID) you have selected or entered. Check the network name (SSID) on your access point and try connecting again. •Your access point is not turned on. Turn on your access point. Connecting Failure - Invalid Security •You configured security incorrectly. Check the configured security on your access point and machine. Connecting Failure - General Connection Error •Your computer is not receiving a signal from your machine. Check the USB cable and your machine's power. Connecting Failure - Connected Wired Network •Your machine is connected with a wired network cable. Remove the wired network cable from your machine. Wireless network setup (CLP-325W(K)/CLP-326W only)_ 48 Downloaded from www.Manualslib.com manuals search engine