Samsung CLX-3300 User Guide - Page 113

Understanding display messages 11 Misc. messages Message Adjusting Color Registration Calibrating image density... Door Open Close it Scan Unit Open or Exit JAM Door of scanner is open. Meaning Suggested solutions The machine is adjusting the Wait a few minutes. color registration. The machine is calibrating Wait a few minutes. the image density. The cover is not securely latched. Close the cover until it locks into place. The scan unit is not securely • Clear the jam (see latched or paper has "Clearing original jammed in the scanner area. document jams" on page 98). • Close the cover until it locks into place. The cover of scanner is not Close the cover until it securely latched. locks into place. Message Meaning Suggested solutions Error [error number] Install [color] toner The indicated toner cartridge is installed improperly, or the connector is polluted. Reinstall the Samsunggenuine toner cartridge two or three times to confirm it is seated properly. Or clean the connector. If the problem persists, contact the service representatives. Error [error number] Turn off then on Error [error number] Call for service The machine unit cannot be controlled. Reboot the power and try the printing job again. If the problem persists, please call for service. Scanner Locked The scanner is locked. Reboot the power. If the problem persists, please call for service. Install TR. belt unit. The transfer belt is not installed. Install a Samsunggenuine transfer belt. Not compatible transfer belt The transfer belt of the machine is not for your machine. Install the a Samsunggenuine part designed for your machine. Not installed Waste tank The waste toner container is Install a Samsung- not installed. genuine waste toner container. 4. Troubleshooting 113