Samsung CLX-3300 User Guide - Page 48
Labels, Card stock/ Custom-sized paper, Adhesives, Arrangement, Condition
View all Samsung CLX-3300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Media and tray Labels To avoid damaging the machine, use only labels designed for use in laser printers. • Do not run a sheet of labels through the machine more than once. The adhesive backing is designed for only a single pass through the machine. • Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or otherwise damaged. Card stock/ Custom-sized paper • When selecting labels, consider the following factors: - Adhesives: Should be stable at your machine's fusing temperature about 170°C (338°F). - Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets that have spaces between the labels, causing serious jams. - Curl: Must lie flat with no more than 13 mm of curl in any direction. - Condition: Do not use labels with wrinkles, bubbles, or other indications of separation. • Make sure that there is no exposed adhesive material between labels. Exposed areas can cause labels to peel off during printing, which can cause paper jams. Exposed adhesive can also cause damage to machine components. • In the software application, set the margins to at least 6.4 mm (0.25 inches) away from the edges of the material. 2. Menu Overview and Basic Setup 48