Samsung CLX-4195FW User Manual Ver.1.0 (English) - Page 57
Labels, Card stock/ Custom-sized paper, Adhesives, Arrangement, Condition - laser printer
View all Samsung CLX-4195FW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Media and tray • Recommended media: Transparency for a color laser printer by Xerox, such as 3R 91331(A4), 3R 2780 (Letter). Labels To avoid damaging the machine, use only labels designed for use in laser printers. - Condition: Do not use labels with wrinkles, bubbles, or other indications of separation. • Make sure that there is no exposed adhesive material between labels. Exposed areas can cause labels to peel off during printing, which can cause paper jams. Exposed adhesive can also cause damage to machine components. • Do not run a sheet of labels through the machine more than once. The adhesive backing is designed for only a single pass through the machine. • Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or otherwise damaged. Card stock/ Custom-sized paper CLX-419xN/ CLX-419xFN Series CLX-419xFW Series CLX-626xND/ CLX-626xFD Series CLX-626xFR/ CLX-626xFW Series • When selecting labels, consider the following factors: - Adhesives: Should be stable at your machine's fusing temperature about 170°C (338°F). - Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets that have spaces between the labels, causing serious jams. - Curl: Must lie flat with no more than 13 mm of curl in any direction. CLX-419xN/ CLX-419xFN Series CLX-419xFW Series CLX-626xND/ CLX-626xFD Series CLX-626xFR/ CLX-626xFW Series • In the software application, set the margins to at least 6.4 mm (0.25 inches) away from the edges of the material. 2. Menu Overview and Basic Setup 57