Samsung DVE60A9900V User Manual - Page 32
Installation check codes, check again.
View all Samsung DVE60A9900V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
English Installation Installation check codes Check code No problems detected Meaning Vent condition is good. Vent is nearly clogged Over 80 % of the vent is clogged. (This may lead to poor drying performance or cause malfunction) Leave the dryer at room temperature The internal temperature of the dryer is too low (below 32 °F (0 °C)) or too high (over 104 °F (40 °C)) and therefore vent blockage cannot be detected. Items detected in Unit is detecting items inside the drum the drum or there is an error on the dry sensor. Solution 1. Clean the lint filter. 2. Check your vent condition. (Refer to the "Ducting requirements" section) * You must take measures (such as cleaning) through expert personnel. Leave the dryer at room temperature (41~95 °F (5~35 °C)) for an hour and check again. Remove items from the drum and check again. If the problem continues, contact a service center. NOTE For other information codes, see the "Troubleshooting" section on page 64. 32 English Untitled-5 32 2021-05-25 5:20:39