Samsung DVE60A9900V User Manual - Page 64

English Troubleshooting Problem Extended time. Action • Some cycles automatically sense the moisture in the load and shut the dryer off when the selected dryness level is reached. The drying time can change according to the type and amount of laundry. See the cycle chart for reference. If a problem persists, contact a local Samsung service center. Information codes If the dryer fails to operate, you may see an information code on the display panel. To determine what you should do, check the list of codes in the table below, and then try the suggested actions. Information code Door is open FC AC HC 9C1 tC tC5 dF Meaning Action Operating the dryer with the door open. • Make sure the door is properly closed. • Make sure laundry is not caught in the door Invalid power source frequency. • Try restarting the cycle. • If this information code remains, contact a Samsung service center. Electronic control problem (Invalid Communication). Contact a Samsung service center. High temperature heating check. • Clean the lint filter. • If this information code remains, contact a Samsung service center. The electronic control needs to be checked. • Check if power cord is connected properly. • Check if the electrical outlet is working properly. • If the information code remains, contact a Samsung service center. The Thermistor1 resistance is very low or high. • Check for a clogged lint screen. • Check if the vent system is restricted. • If this information code remains, contact a Samsung service center. The Thermistor2 resistance is very low or high. • Check for a clogged lint screen. • Check if the vent system is restricted. • If this information code remains, contact a Samsung service center. Incorrect door switch. Contact a Samsung service center. If any information code keeps appearing on the display, contact a Samsung service center. 64 English Untitled-5 64 2021-05-25 5:20:44