Samsung DVE60A9900V User Manual - Page 63
Wrinkle Prevent Wrinkle, Away, Wrinkle Release.
View all Samsung DVE60A9900V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
English Problem Action The dryer is too loud. • Look for coins, loose buttons, nails, and other objects and remove them immediately. • Check the lint filter. Remove any items stuck inside the lint filter. • Make sure the dryer is level and standing firmly on the floor. • The dryer may hum due to air moving through the drum and fan. This is normal. • It is normal to hear the dryer gas valve or heating element cycle on and off during the drying cycle. • Seams, pockets, and other parts of clothing are harder to dry than Items are not dried evenly. others. This is normal. • Sort heavy and light items separately. There is a smell coming from the dryer. • The smell of paint, varnish, cleaning agents, and other household items could have circulated in the air and entered the dryer. If you notice such a smell, ventilate completely before using the dryer. • If drying in an enclosed area, the dryer could cause the ambient temperature to rise. Accordingly, make sure to open a window and ventilate the area. • Do not attempt to dry wet items after leaving them in the washing machine or dryer for a long time. The dryer turns off before • The load is too small. Throw in few additional items like towels and try the items are dry. drying again. The clothes have lint on them. • Always make sure the lint filter is clean before putting items into the dryer. When drying items that generate a large amount of lint, you may need to clean the lint filter in the middle of a cycle. • Some fabrics (such as white towels) causes more lint and should be dried separately from fabrics that lint attaches easily (such as black linen pants). • Check the inside of the pockets to make sure they are empty before drying. Items still wrinkled after Wrinkle Prevent (Wrinkle Away, Wrinkle Release). • Small loads of 1 to 4 items work best. • Load fewer items. Load similar-type items. • Take out the items immediately after drying is complete. Water drips from the nozzle when the Steam cycles starts. • This is steam condensation. The dripping water will stop after a short time. Sprayed water is not visible during Steam cycles. • Sprayed water is difficult to see when the door is closed. English 63 Untitled-5 63 2021-05-25 5:20:44