Samsung HT-C6600 User Manual (user Manual) (ver.1.0) (English) - Page 27

02 Connections Connecting Audio from External Components S DIGITAL AUDIO IN HDMI IN LAN HDMI OUT COMPONENT OUT OPTICAL Optical Cable (not supplied) Set-Top Box WIRELESS LAN AUX IN VIDEO OUT Red White VCR Audio Cable (not supplied) If the external analog component has only one Audio Out, connect either left or right. OPTICAL AUX OPTICAL : Connecting an External Digital Component Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box). 1. Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital component. 2. Press the FUNCTION button to select D.IN input. • The mode switches as follows : BD/DVD D. IN AUX HDMI. IN1 HDMI. IN2 FM ✎ NOTE  To see video from your Cable Box/Satellite receiver, you must connect it's video output directly to a TV.  This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.  This system supports only DTS and Dolby Digital audio, MPEG audio (bit stream) is not supported. AUX : Connecting an External Analog Component Analog signal components such as a VCR. 1. Connect AUX IN (Audio) on the product to the Audio Out of the external analog component. • Be sure to match connector colors. 2. Press the FUNCTION button to select AUX input. • The mode switches as follows : BD/DVD D. IN AUX HDMI. IN1 HDMI. IN2 FM ✎ NOTE  You connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product. 27 English