Samsung HT-C6600 User Manual (user Manual) (ver.1.0) (English) - Page 29
Connecting to the Network
![]() |
UPC - 036725617384
View all Samsung HT-C6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
02 Connections Connecting to the Network Wireless Network You can connect to the network with a Wireless IP sharer. 1. Connect the included wireless LAN adapter to the Wireless LAN jack on the back panel of the product. - This unit is compatible with the supplied Wireless LAN Adapter. - You can also use the wireless network by connecting the Wireless LAN Gender Adapter to the Wireless LAN Adapter, and then attaching the Wireless LAN Adapter to the Gender Adapter. 2. Set the network options. (See page 41) Broadband service HHDDMMI OI UOTUT LAN COMPONENT OUT Wireless IP sharer PC WIRELESS LAN AUX IN VIDEO OUT OR Networking with PC for AllShare function Wireless LAN Adapter ✎ NOTE (See pages 63~64) You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the wireless network.) Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance, distance, obstacles, interference by other radio devices, etc). Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported. When applying the security key for the AP (wireless IP sharer), only the following is supported. 1) Authentication Mode : WEP, WPAPSK, WPA2PSK 2) Encryption Type : WEP, AES For the AllShare function, a PC must be connected in the network as shown in the figure. 29 English
![](/manual_guide/products/samsung-htc6600-user-manual-user-manual-ver10-english-fe5f013/29.png)