Samsung HT-P30 User Manual (user Manual) (ver.1.0) (English) - Page 17
Connecting the FM and AM Antennas
View all Samsung HT-P30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Connecting the FM and AM Antennas GB If AM reception is poor, connect an outdoor AM antenna(not supplied). CONNECTIONS FM Antenna (supplied) AM Loop Antenna (supplied) Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna. FM antenna connection 1. Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal. 2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. AM antenna connection 1. Connect the AM loop antenna supplied to the AM and terminals. • Insert the black wire into the black terminal and the white wire into the white terminal. 2. If reception is poor, connect an outdoor single vinyl-covered wire to the AM terminal. (Keep the AM loop antenna connected). Cooling Fan The cooling fan supplies cool air to the unit to prevent overheating. Please observe the following cautions for your safety. • Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise and may damage it. • Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.) 16