Samsung MX-JS8000 User Manual - Page 20
Timer Function
View all Samsung MX-JS8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Functions 3. Press the MO/ST button to switch between stereo and mono. • In a poor reception area, select MONO for a clear, interference-free broadcast. • This applies only when listening to an FM station. 4. Find a station by: • Pressing and holding the TUNING 1/2 or ,/. button on the remote control to automatically search for broadcasting stations. 5. If you do not want to store the radio station found, go back to Step 3 and search for another station. Otherwise: a. Press the MEMORY button. b. Or, press the TUNING 1/2 or ,/. button on the remote control to select a program number in the PRESET mode. c. Press the MEMORY button to save the preset. 6. To store other radio frequencies, repeat Steps 4 to 5. ||NOTE | ✎✎ In Tuner mode -- In the MANUAL mode, you can use the 1 or 2 button. -- In the PRESET mode, you can use the 1 or 2 button on the main unit to search a stored radio station. Selecting a Stored Station To listen to a stored station, follow these steps: 1. Select FM or AM by pressing the TUNER button on the main unit or remote control. 2. Press the TUNING MODE button on the remote control or the 5 button on the main unit one or more times until "PRESET" is displayed. 3. Press the MEMORY button on the main unit or remote control, when the desired station is displayed, then the station stored. 4. Press the 1, 2 buttons on the main unit or the TUNING 1/2 or ,/. buttons on the remote control to select a preset number. or You can use the TUNING 1/2 or ,/. button to select the stored station. Timer Function Setting the Clock For each step, you have a few seconds to set the required options. If you exceed this time, you must start again. 1. Press the TIMER SET button on the remote control twice. "CLOCK SET" is displayed. 2. Press the ¬ button on the remote control. The hour flashes. • To increase the hours: , • To decrease the hours: . 3. When the correct hour is displayed, press the ¬ button, and then the minutes flash. • To increase the minutes: , • To decrease the minutes: . 4. When the correct minute is displayed, press the ¬ button. "TIMER PLAY SET" appears in the display. Setting the Timer The timer enables you to set the product to switch on or off at specific times automatically. • Before setting the timer, check that the current time is correct. • For each step, you have a few seconds to set the required options. If you exceed this time, you must start again. • If you no longer want the product to be switched on or off automatically, you must cancel the timer by pressing the TIMER ON/OFF button. 20 English [MX-JS8000-ZP]AH68-02771H-00ENG.indd 20 2015-03-31 오전 9:18:15