Samsung NX20 User Manual Ver.1.0 (English) - Page 42
Connecting the flash, Remove the hot-shoe cover from the camera.
View all Samsung NX20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
My Camera > Accessories Connecting the flash 1 Remove the hot-shoe cover from the camera. 2 Connect the flash by sliding it into the hot-shoe. • To release the flash, gently pull the flash while you press the PUSH button. 3 Press the power button on the flash. • You can capture a photo with a flash that is not fully charged, but it is recommended to use a fully charged flash. • Refer to the optional accessories page for available external flashes. (p. 177) • The available options may differ depending on the shooting mode. • There is an interval between two bursts of the flash. Do not move until the flash fires a second time. • For more details about optional flashes, refer to the user manual for the flash. Use only Samsung-approved flashes. Using incompatible flashes may damage your camera. 41