Samsung PLH403W Instruction Manual - Page 20
Connecting a VCR
View all Samsung PLH403W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
C o n n e c t i o n s Connecting a VCR 1 Unplug the cable or antenna from the back of the TV. 2 Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR. 3 Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV. A coaxial cable is usually included with the VCR. 4 Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks on the TV. If you have a "mono" (not stereo) VCR, use the Y-connector (supplied) to hook up to the left and right audio input jacks of the TV. If your VCR is stereo, you must connect two separate sets of cables. 5 Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO IN jack on the TV. 18
C o n n e c t i o n s
18
Connecting a VCR
1
Unplug the cable or antenna from
the back of the TV.
2
Connect the cable or antenna to
the ANTENNA IN terminal on the
back of the VCR.
3
Connect a coaxial cable between
the ANTENNA OUT terminal on the
VCR and the antenna terminal on
the TV. A coaxial cable is usually
included with the VCR.
4
Connect a set of audio cables
between the AUDIO OUT jacks on
the VCR and the AUDIO jacks on
the TV. If you have a “mono” (not
stereo) VCR, use the Y-connector
(supplied) to hook up to the left and
right audio input jacks of the TV. If
your VCR is stereo, you must con-
nect two separate sets of cables.
5
Connect a video cable between
the VIDEO OUT jack on the VCR
and the VIDEO IN jack on the TV.