Samsung PN50C430A1D User Manual (user Manual) (ver.1.0) (English) - Page 21

Melody (Off / Low / Medium / High) Set so that a melody plays when the TV is turned on or off. ✎✎The Melody does not play. xx When no sound is output from the TV because the MUTE button has been pressed. xx When no sound is output from the TV because the volume has been reduced to minimum with the VOL - button. xx When the TV is turned off by Sleep Timer function. ¦¦ Economical Solutions OO MENUm → Setup → ENTERE The Eco Function can be used to enhance your power savings. Energy Saving (Off / Low / Medium / High) This adjusts the brightness of the TV in order to reduce power consumption. Press any button except the volume button to turn on the screen. Until the screen turns on again, a distorted picture will be displayed for about 4 seconds. Eco Sensor (Off / On) Eco Sensor detects surrounding light intensity using an optical sensor and adjusts the screen's brightness. ■■ Eco Sensor (Off / On): Turns the sensor off or on. ✎✎ If you adjust the Cell Light, the Eco Sensor will be set to Off. ■■ Min Cell Light: Manually adjust the screen brightness (0~10). ✎✎ If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the surrounding light intensity. Support Menu OO MENUm → Support → ENTERE Self Diagnosis ✎✎Self Diagnostic might take few seconds, this is part of the normal operation of the TV. ■■ Picture Test (Yes / No): Use to check for picture problems. Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes. There may be a problem with the TV. Contact Samsung's Call Center for assistance (1-800-SAMSUNG). No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device's user manual. ■■ Sound Test (Yes / No): Use the built-in melody sound to check for sound problems. ✎✎ If you hear no sound from the TV's speakers, before performing the sound test, make sure Speaker Select is set to TV Speaker in the Sound menu. ✎✎ The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button. Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes. There may be a problem with the TV. Contact Samsung's Call Center for assistance (1-800-SAMSUNG). No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device's user manual. ■■ Signal Strength: (Digital channels only) An HD channel's reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength. Software Upgrade Samsung may offer upgrades for your TV's firmware in the future. Please visit Samsung. com or contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port. USB Drive TV Side Panel ✎✎When software is upgraded, video and audio settings you have made will return to their default (factory) settings. ✎✎We recommend you write down your settings so that you can easily reset them after the upgrade. HD Connection Guide Refer to this information when connecting external devices to the TV. Contact Samsung View this information when your TV does not work properly or when you want to upgrade the software. You can find information regarding our call centers and how to download products and software. 21 English 03 Basic Features