Samsung PS42C430 User Manual - Page 9

02 Connections Connecting to an Audio Device Using an Optical (Digital) or Headphone Connection Available devices: digital audio system, amplifier, DVD home theatre digital audio system OPTICAL ✎✎DIGITAL AUDIO OUT (OPTICAL) xx When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system. xx 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH. xx When the receiver (amplifier or DVD home theatre) is set to on, you can hear sound output from the TV's optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the amplifier or DVD home theatre. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the amplifier or DVD home theatre. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre. ✎✎Headphones H: You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled. xx Sound function may be restricted when connecting headphones to the TV. xx Headphone volume and TV volume are adjusted separately. CONNECTIONS COMMON INTERFACE Slot To watch paid channels, the "CI or CI+ CARD" must be inserted. yy If you don't insert the "CI or CI+ CARD", some channels will display the message "Scrambled Signal". yy The pairing information containing a telephone number, the "CI or CI+ CARD" ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. yy When the configuration of channel information has finished, the message "Updating Completed" is displayed, indicating the channel list is updated. ✎✎NOTE xx You must obtain a "CI or CI+ CARD" from a local cable service provider. xx When removing the "CI or CI+ CARD", carefully pull it out with your hands since dropping the "CI (CI+) CARD" may cause damage to it. xx Insert the "CI or CI+ CARD" in the direction marked on the card. xx The location of the COMMON INTERFACE slot may be different depending on the model. xx "CI or CI+ CARD" is not supported in some countries and regions; check with your authorized dealer. xx If you have any problems, please contact a service provider. xx Insert the "CI or CI+ CARD" that supports the current antenna settings. The screen will be distorted or will not be seen. 9 English