Samsung SCD6040 User Manual (user Manual) (ver.1.0) (English) - Page 32
Using the Lithium Ion Battery Pack
View all Samsung SCD6040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
ENGLISH The Camcorder : Preparation Using the Lithium Ion Battery Pack Charging the Lithium Ion Battery Pack 1. Attach the Battery Pack to the device. 2. Connect the AC Power Adapter to the AC Power Cord and connect the AC Power Cord to a wall outlet. 3. Connect the DC cable to the DC jack on the device. 4. Turn the device off and the charging indicator will start to flash, showing that the battery is charging. Blinking time Charging rate Once per second Less than 50% Twice per second 50% ~ 75% REC PLAY Three times per second 75% ~ 90% OFF Blinking stops and stays on 90 ~ 100% On for a second and off for another second Error - Reset the battery pack and the DC cable 5. When the battery is fully charged, disconnect the battery pack and the AC Power Adapter from the device. Notes OFF ✤ The amount of continuous recording time available depends on: - The type and capacity of the battery pack you are using. - How often the Zoom / flash is used. - Type of use (Camcorder/Camera/With LCD monitor etc.). - Ambient temperature. It is recommended to have additional battery packs available. ✤ Even when the power switched off, the battery pack will still discharge if it is leftOFF attached to the device. ✤ The Battery Pack may be charged a little at the time of purchase. ✤ Fully discharging the Lithium battery pack is not required since there is no memory effect. ✤ For prolonged use of the Battery Pack, remove the Battery Pack from the camcorder after use/charging. 28 OFF