Samsung SCP-3430HP User Manual - Page 29
White Bal
View all Samsung SCP-3430HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
● setup You can specify MASK 1 and 2 simultaneously. If is set to , the MASK AREA function is not available. EXT : The interface to an external alarm enables an automatic switch between DAY and NIGHT mode. If you set to EXT, and alarm #1 to NO/NC in ALARM SETALARM IN SET, the alarm can be used for an input signal in EXT mode of . If an alarm signal occurs, the mode will switch to NIGHT. M If is set to EXT, ALARM1 in ALARM OUT SET, and ALARM1 in ALARM SET-AUTO SET are not available. If you use an infrared light source while in AUTO mode, this may cause a failure in AUTO SWITCH or AUTO FOCUS. WHITE BAL If you need to adjust the color according to the ambient illumination, you can use the function. For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20) Illumination is generally referred to as color temperature, which is represented in a measurement of kelvin (K). Color temperatures for ordinary lighting are as follows: In the menu, you can set a mode for correcting the . 10000K 9000K Blue sky Rainy - ATW1,2 : If you set the menu to or mode, this will monitor the change of the color temperature to correct the as needed. The following color temperature ranges are assured in individual modes: ATW1 : 2500K ~ 9300K (1) ATW2 : 2000K ~ 10000K (suitable to sodium light source) (2) 8000K 7000K 6000K Cloudy 5000K 4000K 3000K Sunny Partly Cloudy Fluorescent lamp 2000K 1000K Halogen lamp Candlelight Tungsten lamp 1 : With mode active in a color temperature environment ranging beyond between 2500K and 9300K, a proper white balance value may not be produced; if this is the case, you are recommended to use mode. 2 : With mode active in a mostly single color environment, the display color and the actual one may differ; so select a mode as appropriate to your color temperature environment. English _29