Samsung SCP-3430HP User Manual - Page 32

Display P/t, Digital Zoom, Detail, V-sync, Agc Color Sup, Reverse, Posi/nega

Get Samsung SCP-3430HP PDF manuals and user guides View all Samsung SCP-3430HP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

setup DISPLAY P/T You can set to display the operation status of pan/tilt when it is active.  It will disappear in about 3 seconds if the pan/tilt position has no further change. However, the allowable error is ±2°. DIGITAL ZOOM You can set the maximum allowable digital zoom ratio. Digital Zoom will start operation after it is zoomed in to the maximum optical ratio of x43. If you set DIGITAL ZOOM to x16, you can take a shot at up to x688 (43x16). DETAIL Used to adjust the vertical and horizontal distinction, respectively. V-SYNC You can set the V-SYNC mode. - If you select , the camera will use the internal synchronization. - If selecting , the camera will use an external power frequency for synchronization. The LL-PHASE can be adjusted as appropriate. AGC COLOR SUP You can adjust the color reproduction range according to AGC. AGC COLOR SUP MID REVERSE REVERSE OFF POSI/NEGA + PIP OFF You can reverse the video signal from left DIS OFF to right, upside down, or vice versa to your convenience. POSI/NEGA You can set the video brightness signal to normal or reverse. PIP You can view a main image with a sub image on the same screen. 32_ setup

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
²±_
setup
setup
DISPLAY P/T
You can set to display the operation status of pan/tilt when it is active.
It will disappear in about 3 seconds if the pan/tilt position has no further change.
However, the allowable error is ±2°.
DIGITAL ZOOM
You can set the maximum allowable digital zoom ratio.
Digital Zoom will start operation after it is zoomed in to the maximum optical ratio of
x43. If you set DIGITAL ZOOM to x16, you can take a shot at up to x688 (43x16).
DETAIL
Used to adjust the vertical and horizontal distinction, respectively.
V-SYNC
You can set the V-SYNC mode.
- If you select <
INT
>, the camera will use the internal synchronization.
- If selecting <
LINE
>, the camera will use an external power frequency for
synchronization. The LL-PHASE can be adjusted as appropriate.
AGC COLOR SUP
You can adjust the color reproduction range
according to AGC.
REVERSE
You can reverse the video signal from left
to right, upside down, or vice versa to your
convenience.
POSI/NEGA
You can set the video brightness signal to
normal or reverse.
PIP
You can view a main image with a sub image on the same screen.
AGC COLOR SUP
MID
REVERSE
OFF
POSI/NEGA
+
PIP
OFF
DIS
OFF