Samsung SCP-3430HP User Manual - Page 37

● setup 5. Select and adjust the pan/tilt speed of the preset. 6. Set the that defines the camera's hold duration and of the preset.  If you set the to , the video image will be held still until the camera reaches the preset position. 7. Set to . You can adjust camera setups for each CAMERA SET preset. IRIS ALC  For details on setting , WHITE BAL FOCUS MODE MF and , refer to "CAMERA SET". (pages 24 ~ 33) M  If VPS is set to ON in Camera Setup from the main menu, the camera will operate in VPS even if it's set to WDR in PRESET.  If you use WDR in PRESET, the camera will operate in WDR and release any previous settings even if AGC has been set to FIX, SHUTTER to ON, SENSE UP to FIX in the main menu.  The preset position can be specified for a tilt range of between -6° and 90°. Those presets that are out of a tilt of 90° can not be specified.  If you try to specify a preset position for a range exceeding a tilt of 90° using a controller (SSC-1000, 2000 or 5000), you will see a message of on the screen. If this is the case, try again for a range below a tilt of 90°.  If you upload/download the menu setting using SSC-1000, 2000 or 5000, the preset may differ from the menu setting so define the preset again after the operation. English _37