Samsung SCP-3430HP User Manual - Page 31
Focus Mode, Zoom Speed, Display Zoom
View all Samsung SCP-3430HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
● setup FOCUS MODE You can select a focus mode according to the angle that you adjusted for camera recording. - AF : This will monitor the screen continuously to focus automatically. If you adjust the focus manually, that will operate the same as in . This will also restore focus after the operation of pan/tile/zoom. - SENSITIVITY : Indicates the sensitivity of auto focus, which you can adjust between level 1 and level 7. The closer your setting is to 7, the more sensitively the auto focus function performs. The Night setting is used when a strong light reflects in a low contrast scene. You can set it to OFF, LOW, MEDIUM, or HIGH; set it to when there exist a strong light such as street light. - ONEAF : Restores focus after the operation of pan/tile/zoom, and operates the same as in unless the operation of pan/tile/ zoom is executed. - MF : You can adjust the focus manually. DAY/NIGHT WHITE BAL FOCUS MODE ZOOM SPEED DISPLAY ZOOM DISPLAY P/T DIGITAL ZOOM DETAIL V-SYNC AF SENSITIVITY NIGHT AUTO AF [2] OFF OFF X16 [2] INT [5] MID M While you are working on the following objects, may not work properly. If this is the case, use instead. - Very bright object, or dominant object in a dark scene - Object against the rear side of a moist or dirty glass - A scene where nearby and distant objects co-exist - White wall or single-colored object - Venetian blinds and other horizontally striped objects ZOOM SPEED You can adjust the zoom operation speed. DISPLAY ZOOM You can set to display the zoom status on the screen. It will disappear in about 3 seconds if the zoom factor has no further change. English _31