Samsung SCP-3430HP User Manual - Page 39

● setup 3. Select each item and set appropriately.  POSITION : Set the starting and ending AUTO PAN 1 positions for the . POSITION Move to the setting screen and adjust pan/tilt to the desired starting position, and then press [ENTER]. DIRECTION ENDLESS SPEED DWELL TIME LEFT OFF [10] 3SEC Again, adjust pan/tilt to the desired ending position and press [ENTER] to finish setup.  DIRECTION : Sets the direction of the camera's movement from the starting to the end position. (Based on panning) START START END END  ENDLESS : Instead of shuttling between start and end positions, the camera turns 360° endlessly while stops for the at both positions.  SPEED : Sets the moving speed of the camera, from 1 to 64.  DWELL TIME : Sets the dwell time at the starting and ending positions, from 1 to 60 seconds. Pattern Setup You can manually record your pan/tilt/zoom movements to a monitoring pattern for up to 2 minutes. For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20) 1. Select -. 2. Select the pattern number. PATTERN setup screen appears. 3. Select the and set the pattern's starting position and press [ENTER]. PATTERN SET 1 START English _39