Samsung SD850 User Manual

Samsung SD850 Manual

Get Samsung SD850 PDF manuals and user guides View all Samsung SD850 manuals
Add to My Manuals
Save this manual to your list of manuals

Samsung SD850 manual content summary:

  • Samsung SD850 | User Manual - Page 1
    User Manual S27D850T S32D850T The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00424A-16
  • Samsung SD850 | User Manual - Page 2
    23 23 24 26 26 27 28 29 CONNECTING AND USING 30 A SOURCE DEVICE 30 Copyright Icons used in this manual Cleaning Securing the Installation Space Wall-mount Kit or Desktop Stand Adjusting the Product Tilt and Height Rotating the Monitor Screen Anti-theft Lock "MagicRotation Auto" Rotating the monitor
  • Samsung SD850 | User Manual - Page 3
    a USB HUB Driver Installation Setting Optimum Resolution Brightness Configuring Brightness Contrast Configuring Contrast Sharpness Configuring Sharpness Game Mode Configuring Game Mode SAMSUNG MAGIC Bright Configuring SAMSUNG MAGIC Bright SAMSUNG MAGIC Upscale Configuring SAMSUNG MAGIC Upscale Color
  • Samsung SD850 | User Manual - Page 4
    Table Of Contents 52 52 SCREEN ADJUSTMENT 53 53 55 55 56 57 58 59 60 61 63 67 COORDINATING OSD 69 69 70 70 71 71 SETUP AND RESET 72 72 75 76 77 77 79 79 80 80 Response Time Configuring the Response Time Image Size Changing the Image Size H-Position & V-Position Configuring H-Position & V-Position
  • Samsung SD850 | User Manual - Page 5
    86 INFORMATION MENU AND 87 OTHERS 87 88 INSTALLING THE 89 SOFTWARE 89 90 TROUBLESHOOTING 91 GUIDE 91 91 91 94 SPECIFICATIONS 96 98 99 Source Detection Software Removing the Software Requirements Before Contacting Samsung Customer Service Center Testing the Product Checking the Resolution
  • Samsung SD850 | User Manual - Page 6
    Table Of Contents APPENDIX 101 101 101 101 103 103 103 104 Responsibility for the Pay Service (Cost to Customers) Not a product defect A Product damage caused by customer's fault Others Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) Extended
  • Samsung SD850 | User Manual - Page 7
    Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung in the product. (i.e. where you have failed to read this user manual)  (b) you bring the unit to a repair center and there is no
  • Samsung SD850 | User Manual - Page 8
    as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may
  • Samsung SD850 | User Manual - Page 9
    (10 cm) 3.93 inches (10 cm) 3.93 inches (10 cm) 3.93 inches (10 cm) 3.93 inches (10 cm) Precautions for storage Be sure to contact Samsung Customer Service Center if the inside of the monitor needs cleaning. (Service fee will be charged.) 9 Before Using the Product
  • Samsung SD850 | User Manual - Page 10
    (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates instructions are not followed. Personal injury or damage to properties may result if instructions are not followed. Activities marked by this symbol are prohibited. Instructions
  • Samsung SD850 | User Manual - Page 11
    Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket.  An electric shock or fire may result. Do not plug many
  • Samsung SD850 | User Manual - Page 12
    Samsung. !  An electric shock or fire may result. Keep the power socket where the power cord is connected unobstructed.  If any problem occurs product in a narrow space with bad ventilation, such as a bookshelf or wall closet.  Otherwise, a fire may result due to an increased internal
  • Samsung SD850 | User Manual - Page 13
    Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.).  The product may fall and break or cause a personal injury.  Using the product in an area with excess vibration may damage the product or cause a fire. Do not install
  • Samsung SD850 | User Manual - Page 14
    become injured or seriously harmed. If the product falls or the exterior is damaged, power off the product, remove the power cord, and contact Samsung Customer Service Center.  Otherwise, an electric shock or fire may result. Do not put a heavy object, toy, or sweets on top of the product.  The
  • Samsung SD850 | User Manual - Page 15
    .  If water or any foreign substance enters the product, be sure to power off the product, remove the power cord, and contact Samsung Customer Service Center.  Product failure, an electric shock or fire may result. Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
  • Samsung SD850 | User Manual - Page 16
    electric shock, or electric leakage. Use the product at the recommended resolution and frequency.  Your eyesight may deteriorate. Looking at the screen an extended period of time can deteriorate your eyesight. Do not hold the monitor upside-down or move it by holding the stand.  The product may fall
  • Samsung SD850 | User Manual - Page 17
    Before Using the Product Exercise caution when adjusting the product angle or stand height.  Otherwise, children's fingers or hands may become stuck and injured. !  Tilting the product excessively may cause it to fall and result in personal injury. Do not place heavy objects on the product.
  • Samsung SD850 | User Manual - Page 18
    . Components Quick setup guide Warranty card (Not available in some locations) User manual (optional) Power cable DVI cable (optional) HDMI cable (optional) HDMI-DVI cable (optional) DP cable (optional) USB 3.0 cable (optional) Stereo cable (optional) Wall-mount bracket (optional) Mini
  • Samsung SD850 | User Manual - Page 19
    may differ from what is shown. Specifications are subject to change without notice to improve quality. MENU SOURCE PIP/PBP MENU Function Key Guide SOURCE PIP/PBP Icons Description The Eco Light Sensor feature optimizes the view condition and contributes to power saving by adjusting the screen
  • Samsung SD850 | User Manual - Page 20
    settings for the PIP/PBP function is required. Turn the screen on or off. When a control button on the product is pressed, the Function Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.) To access the onscreen menu when the
  • Samsung SD850 | User Manual - Page 21
    from what is shown. Specifications are subject to change without notice to improve quality. 1 1 2 2 3 4 3 4 Port Description Connect the power cord for your monitor to the [POWER IN] port on the back of the product. Connects to a source device via a DVI cable. Connect to a source device using an
  • Samsung SD850 | User Manual - Page 22
    1 Preparations Port Description Connect to a USB device. Compatible with a USB cable version 3.0 or lower. High-speed charging is possible using the [ 1] and [ 2] ports only. These ports charge devices faster than typical USB ports. The speed depends on the connected devices. Connect to an
  • Samsung SD850 | User Manual - Page 23
    1 Preparations 1.3 Installation 1.3.1 Attaching the Stand  Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.  The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to
  • Samsung SD850 | User Manual - Page 24
    1 Preparations 1.3.2 Installing a Wall-mount Kit or Desktop Stand The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve
  • Samsung SD850 | User Manual - Page 25
    shall not be held liable for any damage or injury caused by using improper screws or attaching the wall-mount kit or desktop stand using excessive force.  Samsung shall not be held liable for any product damage or personal injury caused by using a wallmount kit other than the one specified or
  • Samsung SD850 | User Manual - Page 26
    shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -5° (±2°) ~ 20° (±2°) 0 ~ 130 mm (±2 mm)  The monitor tilt and height can be adjusted.  Hold the top center of the product and adjust the height carefully. 1.3.4 Rotating the
  • Samsung SD850 | User Manual - Page 27
    shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. The lock -theft locking device can be purchased separately.  Refer to the user guide provided with your anti-theft locking device for details.  Anti-theft
  • Samsung SD850 | User Manual - Page 28
    monitors that are fitted with a rotation sensor and rotates the Windows screen accordingly. [Software Installation] 1 Insert the user manual CD provided with the product into the CD-ROM drive. 2 Follow the instructions with Windows 7 (32 bit or 64 bit) and Windows 8 (32 bit or 64 bit card driver to
  • Samsung SD850 | User Manual - Page 29
    items will automatically rotate when the screen rotates. MENU SOURCE PIP/PBP MENU SOURCE PIP/PBP [Caution] 1 If the "MagicRotation Auto" software is not installed on the monitor, contents on the screen cannot be rotated. The OSD can still rotate by 90° and display properly. 2 Once rotated, the
  • Samsung SD850 | User Manual - Page 30
    Checkpoints  Before connecting a source device, read the user manual provided with it. The number and locations of ports on to DVI.  Provided ports may vary depending on the product.  If audio is supported and the stereo cable is connected, the Volume can be adjusted using the [ ] buttons
  • Samsung SD850 | User Manual - Page 31
    ] port on the back of the product and the HDMI port on the PC. 2 Press [ ] to change the input source to DVI.  If audio is supported and the stereo cable is connected, the Volume can be adjusted using the [ ] buttons on the front of the product.  Provided ports may vary depending
  • Samsung SD850 | User Manual - Page 32
    DVI HDMI DisplayPort PC AV DVI PC Select the PC/AV mode for the HDMI source.  If audio is supported, the Volume can be adjusted using the [ product. ] buttons on the front of the  In order to PC.  Provided ports may vary depending on the product. 32 2 Connecting and Using a Source Device
  • Samsung SD850 | User Manual - Page 33
    2 Connecting and Using a Source Device 2.2.4 Connection Using the HDMI-DVI Cable Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. HDMI IN 1 Connect the HDMI-DVI cable to the [HDMI IN] port on the back of
  • Samsung SD850 | User Manual - Page 34
    of the product and the other end to the DP port on the PC. 2 Press [ ] to change the input source to DisplayPort.  If audio is supported, the Volume can be adjusted using the [ product.  Provided ports may vary depending on the product. ] buttons on the front of the 34 2 Connecting and
  • Samsung SD850 | User Manual - Page 35
    Using a Source Device 2.2.6 Connecting to Headphones or Speakers Do not connect the power cable before connecting all and the AUDIO OUT port on the PC. 2 Connect an audio output device such as headphones or speakers to [AUDIO OUT] on the product.  If the stereo cable is connected, the Volume can
  • Samsung SD850 | User Manual - Page 36
    2 Connecting and Using a Source Device 2.2.7 Connecting the Power  Connecting parts may differ in different products.  The exterior may differ depending on the product.  To use the product, connect the power cable to a power outlet and the [POWER IN] port on the product. POWER IN The input
  • Samsung SD850 | User Manual - Page 37
    2 Connecting and Using a Source Device 2.2.8 Tidying Up the Connected Cables Remove the COVER-CABLE by sliding it down with both hands in the direction indicated by the arrow. Install the cables into the cable holder at the right side. Hold the COVER-CABLE and fix the cables into the grooves on
  • Samsung SD850 | User Manual - Page 38
    product to a PC. However, to take full advantage of the USB 3.0 function, connect a USB 3.0 cable between the PC and the product. Ensure the PC supports USB 3.0. 2.3.2 Utilizing the Product as a USB HUB Using the product as a hub, connect and use various source devices with the product at the same
  • Samsung SD850 | User Manual - Page 39
    be affected by the USB device and your PC.  The product does not support media play. If you need to play a file in your USB device, and play the file on your PC.  For USB-related problems caused by OS, drive programs or software, please contact relevant suppliers.  With the launch of various
  • Samsung SD850 | User Manual - Page 40
    .  If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com/) and download the file. 1 Insert the user manual CD provided with the product into the CD-ROM drive. 2 Click "Windows Driver". 3 Follow the instructions given on the screen to proceed with installation. 4 Select
  • Samsung SD850 | User Manual - Page 41
    \RXU3& (QJOLVK 5HWXUQ 1 Press [ ] to move to the language you want and press [ ]. 2 To hide the information message, press [ ] or [ ].  If the optimum resolution is not selected, the message will appear up to three times for a specified time even when the product is turned off and on again
  • Samsung SD850 | User Manual - Page 42
    or Eco Saving is set to On. 3.1.1 Configuring Brightness 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Picture and press [ ] on the product. 3 Press [ ] to move to Brightness
  • Samsung SD850 | User Manual - Page 43
    the Size is set to (PBP Mode). 3.2.1 Configuring Contrast 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Picture and press [ ] on the product. 3 Press [ ] to move to Contrast
  • Samsung SD850 | User Manual - Page 44
    when PIP/PBP Mode is set to On. 3.3.1 Configuring Sharpness 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Picture and press [ ] on the product. 3 Press [ ] to move to Sharpness
  • Samsung SD850 | User Manual - Page 45
    1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ press [ ]. 5 The selected option will be applied.  When the monitor turns off, enters power-saving mode or changes input sources, Game Mode turns
  • Samsung SD850 | User Manual - Page 46
    PBP Mode is set to On. You can customize the brightness to suit your preferences. 3.5.1 Configuring SAMSUNG MAGIC Bright 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Picture and
  • Samsung SD850 | User Manual - Page 47
    3 Screen Setup Picture Brightness Contrast Sharpness Game Mode SMAAMSGUINCG Bright SMAAMSGUINCG Upscale Color Dynamic Standard Movie Custom 100 75 60 Custo5m0 O50ff 22O00ff Wide0 Set to an optimum picture quality suitable for the working environment. When the external input is connected through
  • Samsung SD850 | User Manual - Page 48
    resolution pictures.  This menu is not available when MSAAMSGUINCGBright is in Cinema or Dynamic Contrast mode.  This menu is not available when Game Mode is enabled. 3.6.1 Configuring SAMSUNG MAGIC Upscale 1 Press any button on the front of the product to display the Function Key Guide.
  • Samsung SD850 | User Manual - Page 49
    when PIP/PBP Mode is set to On. 3.7.1 Configuring Color 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Picture and press [ ] on the product. 3 Press [ ] to move to Color and
  • Samsung SD850 | User Manual - Page 50
    3 Screen Setup  Warm 2: Set the color temperature to be warmer than Warm 1.  Custom: Customize the color tone. When the external input is connected through DVI/HDMI/DP and PC/AV Mode is set to AV, Color Tone has four color temperature settings (Cool, Normal, Warm and Custom).  Gamma: Adjust
  • Samsung SD850 | User Manual - Page 51
    is set to On. 3.8.1 Configuring the HDMI Black Level Settings 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Picture and press [ ] on the product. 3 Press [ ] to move to HDMI
  • Samsung SD850 | User Manual - Page 52
    you are not viewing a movie. 3.9.1 Configuring the Response Time 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Picture and press [ ] on the product. 3 Press [ ] to move to
  • Samsung SD850 | User Manual - Page 53
    Changing the Image Size 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Screen function may not be supported depending on the ports provided with the product. 53 4 Screen Adjustment
  • Samsung SD850 | User Manual - Page 54
     A digital output device is connected using the DVI/HDMI/DP cable.  The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can support all of these signals.).  This can only be set when the external input is connected through DVI/HDMI/DP and PC/AV
  • Samsung SD850 | User Manual - Page 55
    576P or 720P or 1080P signal is input in AV mode and the monitor can display normally, select Screen Fit to adjust horizontal position in 0-6 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ]
  • Samsung SD850 | User Manual - Page 56
    are delayed in transmission to the monitor depending on the graphics card performance.  To maximize the picture quality, it is recommended to use a graphics card that supports 2K (2560 x 1440) resolution.  When the PIP/PBP function is enabled, the resolution may not automatically switch to the
  • Samsung SD850 | User Manual - Page 57
    PIP/PBP Mode Enable or disable the PIP/PBP function. 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Screen and press [ ] on the product. 3 Press [ ] to move to PIP/PBP
  • Samsung SD850 | User Manual - Page 58
    screen. 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to the icon image if you want to use PBP mode where the optimum resolution for the left and right sides of the screen is 1280 x 1440
  • Samsung SD850 | User Manual - Page 59
    the position of the sub-screen from the available options. 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Screen and press [ ] on the product. 3 Press [ ] to move to PIP/PBP
  • Samsung SD850 | User Manual - Page 60
    Source Set which screen you want to hear the sound for. 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Screen and press [ ] on the product. 3 Press [ ] to move to PIP/PBP and
  • Samsung SD850 | User Manual - Page 61
    4.3.5 Configuring Source Select the source for each screen. PIP 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Screen and press [ ] on the product. 3 Press [ ] to move to PIP
  • Samsung SD850 | User Manual - Page 62
    4 Screen Adjustment PBP 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Screen and press [ ] on the product. 3 Press [ ] to move to PIP/PBP and
  • Samsung SD850 | User Manual - Page 63
    Image Size Select the image size for sub-screen. PIP 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Screen and press [ ] on the product. 3 Press [ ] to move to PIP/PBP
  • Samsung SD850 | User Manual - Page 64
    .  A digital output device is connected using the DVI/HDMI/DP cable.  The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can support all of these signals.).  This can only be set when the external input is connected through DVI/HDMI/DP and PC/AV
  • Samsung SD850 | User Manual - Page 65
    4 Screen Adjustment PBP 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Screen and press [ ] on the product. 3 Press [ ] to move to PIP/PBP and
  • Samsung SD850 | User Manual - Page 66
    .  A digital output device is connected using the DVI/HDMI/DP cable.  The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can support all of these signals.).  This can only be set when the external input is connected through DVI/HDMI/DP and PC/AV
  • Samsung SD850 | User Manual - Page 67
    Contrast PIP Adjust the contrast level for sub-screen. 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Screen and press [ ] on the product. 3 Press [ ] to move to PIP
  • Samsung SD850 | User Manual - Page 68
    Screen Adjustment PBP Adjust the contrast level for each screen. 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Screen and press [ ] on the product. 3 Press [ ] to move to PIP
  • Samsung SD850 | User Manual - Page 69
    be applied to other functions on your PC. 5.1.1 Configuring Language 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Options and press [ ] on the product. 3 Press [ ] to move to
  • Samsung SD850 | User Manual - Page 70
    you want the OSD menu to disappear. 5.2.1 Configuring Display Time 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Options and press [ ] on the product. 3 Press [ ] to move to
  • Samsung SD850 | User Manual - Page 71
    the transparency for the menu windows. 5.3.1 Changing Transparency 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Options and press [ ] on the product. 3 Press [ ] to move to
  • Samsung SD850 | User Manual - Page 72
    available when Eco Saving is set . Configuring Eco Light Sensor 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Settings and press [ ] on the product. 3 Press [ ] to move to ECO
  • Samsung SD850 | User Manual - Page 73
    6 Setup and Reset Configuring Sensitivity 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Settings and press [ ] on the product. 3 Press [ ] to move to ECO and press [ ]
  • Samsung SD850 | User Manual - Page 74
    6 Setup and Reset Configuring Brightness Level 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Settings and press [ ] on the product. 3 Press [ ] to move to ECO and press [ ]
  • Samsung SD850 | User Manual - Page 75
    reduces power consumption by controlling the electric current used by the monitor panel.  This menu is not available when MSAAMSGUINCGBright is 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ]
  • Samsung SD850 | User Manual - Page 76
    Disable the Eco Icon Display function.  On: Display the operation status of the Eco sensor as a pop-up guide. 5 Press [ ] to move to the option you want and press [ ]. 6 The selected option will in the check signal or no signal mode, the monitor will not display the OSD. 76 6 Setup and Reset
  • Samsung SD850 | User Manual - Page 77
    device.  Quick battery charging may not be supported and/or charging may take more time on to USB ports 1 through 4 on the monitor are re-recognized. This ensures optimum charging. the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen
  • Samsung SD850 | User Manual - Page 78
    6 Setup and Reset Settings ECO USB Super Charging DisplayPort Ver. PC/AV Mode Source Detection Key Repeat Time Off Timer Set the USB Super charging mode. 1.1 Auto Acceleration USB Super Charging USB Super Charging Off USB1 On USB2 Set the USB Super charging mode. USB Super Charging USB
  • Samsung SD850 | User Manual - Page 79
    supports High Bit Rate 1, while 1.2 supports High Bit Rate 2.  Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.  If the monitor on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu
  • Samsung SD850 | User Manual - Page 80
    for the wide models only such as 16:9 or 16:10.  If the monitor (when set to DVI, HDMI or DisplayPort) is in power saving mode or AV Mode 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move
  • Samsung SD850 | User Manual - Page 81
    6 Setup and Reset PC/AV Mode DVI HDMI DisplayPort PC AV DVI PC Select the PC/AV mode for the HDMI source. PC/AV Mode DVI HDMI DisplayPort PC AV Select the PC/AV PC mode for the DisplayPort source.  Set to PC when connected to a PC.  Set to AV when connected to an AV device.  In order
  • Samsung SD850 | User Manual - Page 82
    1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ be detected. 1.1 Auto Manual Auto Acceleration  Auto: The input source is automatically recognized.  Manual: Manually select an input source.
  • Samsung SD850 | User Manual - Page 83
    when the button is pressed. 6.6.1 Configuring Key Repeat Time 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Settings and press [ ] on the product. 3 Press [ ] to move to Key
  • Samsung SD850 | User Manual - Page 84
    the product to automatically turn off. 6.7.1 Configuring Off Timer 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to Settings and press [ ] on the product. 3 Press [ ] to move to
  • Samsung SD850 | User Manual - Page 85
    Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ screen will appear. Off Timer Off Timer Turn Off After Set the monitor to On automatically turn off after a certain time 4h period. 5
  • Samsung SD850 | User Manual - Page 86
    the product to the default factory settings. The functions available on the monitor may vary depending on the model. Refer to the actual product. 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ]
  • Samsung SD850 | User Manual - Page 87
    to your product for details. 7.1 Information View the current input source, frequency and resolution. 7.1.1 Displaying Information 1 Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to display the corresponding menu screen. 2 Press [ ] to move to
  • Samsung SD850 | User Manual - Page 88
    to (PBP Mode). 1 Press any button on the front of the product (when no menu screen is displayed) to display the Function Key Guide. Next, press [ ]. The following screen will appear. Volume Brightness 75 Contrast 2 Press the [ ] button to alternate between the Brightness, Contrast and Volume
  • Samsung SD850 | User Manual - Page 89
    Box "Easy Setting Box" enables users to use the monitor by partitioning multiple sections. 8.1.1 Installing the Software 1 Insert the installation CD into the CD-ROM drive. 2 Select the "Easy Setting Box" setup program. If the pop-up screen for the software installation does not appear on the
  • Samsung SD850 | User Manual - Page 90
    8 Installing the Software 8.1.2 Removing the Software Click Start, select Settings/Control Panel, and then double-click Add or Remove Programs. Select "Easy Setting Box" from the program list and click the Add/Delete button. 90 8 Installing the Software
  • Samsung SD850 | User Manual - Page 91
    9 Troubleshooting Guide 9.1 Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating
  • Samsung SD850 | User Manual - Page 92
    the range of resolution and frequency compatible with the product. Next, if required, change the settings, referring to Standard Signal Mode Table (page 99) in this manual and the Information not really look white. Change the Color settings. (Refer to "3.7 Color") 92 9 Troubleshooting Guide
  • Samsung SD850 | User Manual - Page 93
    low after turning it up to the maximum level, adjust the volume on your PC sound card or software program. Source device issue Issues Solutions A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced. 93 9 Troubleshooting Guide
  • Samsung SD850 | User Manual - Page 94
    Screen Resolution Advanced settings Monitor, and adjust Refresh rate under Monitor settings.  Windows 8: Go to Settings Control Panel Appearance and Personalization Display Screen Resolution Advanced settings Monitor, and adjust Refresh rate under Monitor settings. 94 9 Troubleshooting Guide
  • Samsung SD850 | User Manual - Page 95
    Resolution, and adjust the resolution.  Windows 8: Go to Settings Control Panel Appearance and Personalization Display Adjust Resolution, and adjust the resolution. the PC. Refer to the user manual for your PC or graphics card for further instructions on adjustment. 95 9 Troubleshooting Guide
  • Samsung SD850 | User Manual - Page 96
    S27D850T S32D850T Panel Power Supply Dimensions (W x H x D) / Weight Size 27 Inches (68 cm) 32 Inches (81 cm) Display area 596.7 mm (H) x 335.6 mm (V) 708.48 mm (H) x 398.52 mm (V) 23.5 Inches (H) x 13.2 Inches (V) 27 Inches 3.9 Inches x 3.9 Inches Wall-mount accessory : 200 mm x 200 mm
  • Samsung SD850 | User Manual - Page 97
    compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877) 278 - 0799 97 10 Specifications
  • Samsung SD850 | User Manual - Page 98
    mode functions only when the product is connected to a PC that has a power-saving function. PowerSaver Power Indicator Power Consumption (S27D850T) Power Consumption (S32D850T) Normal operation mode On With USB: Typical 85 W Without USB: Typical 50 W With USB: Typical 95 W Without USB: Typical 60
  • Samsung SD850 | User Manual - Page 99
    If the LCD monitor does not support 85 Hz, change the vertical frequency to 60 Hz using the CDT monitor before you exchange it with the LCD monitor. Model Name Synchronization Horizontal Frequency Vertical Frequency Resolution Optimum Resolution Maximum Resolution S27D850T / S32D850T 30 ~ 90
  • Samsung SD850 | User Manual - Page 100
    10 Specifications Resolution MAC, 1152 x 870 VESA, 1280 x 720 VESA, 1280 x 800 VESA, 1280 x 1024 VESA, 1280 x 1024 VESA, 1440 x 900 VESA, 1600 x 900RB VESA, 1680 x 1050 VESA,
  • Samsung SD850 | User Manual - Page 101
    besides an engineer of outsourcing service company or partner of Samsung Electronics Co., Ltd.  remodeling or repairing the product by customer.  using it with incorrect voltage or non-authorised electrical connections.  not following the "cautions" in User Manual. Others  If product fails by
  • Samsung SD850 | User Manual - Page 102
    Appendix If customer requests a service in case the product has no defect, service fee may be charged. So please read User Manual first. Appendix 102
  • Samsung SD850 | User Manual - Page 103
    they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions years, in the event that the Samsung's service center has run out of replacement parts and cannot repair the product, Samsung will replace your product at no
  • Samsung SD850 | User Manual - Page 104
    image. The horizontal frequency is measured in kHz and represents how many times horizontal lines per second are transmitted and displayed on the monitor screen. A horizontal frequency of 85 means that the horizontal lines that make up an image are transmitted 85000 times per second. The horizontal
  • Samsung SD850 | User Manual - Page 105
    768 vertical lines (vertical resolution). E.g. A resolution of 1920 x 1080 consists of 1920 horizontal pixels (horizontal resolution) and 1080 vertical lines (vertical resolution). Plug & Play The Plug & Play feature allows the automatic exchange of information between a monitor and PC to produce
  • Samsung SD850 | User Manual - Page 106
    80 PIP/PBP 56 Q Q & A 94 R Requirements Before Contacting Samsung Customer Service Center 91 Reset All 86 Response Time 52 Responsibility for the Pay Service (Cost to Customers) 101 Rotating the monitor 29 S Safety Precautions 10 SAMSUNG MAGIC Bright 46 SAMSUNG MAGIC Upscale 48 Sharpness 44 Source
  • Samsung SD850 | User Manual - Page 107
    Index T Terminology 104 Transparency 71 U USB Super Charging 77 Utilizing the Product as a USB HUB 38 Index 107
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
User Manual
S27D850T
S32D850T
The color and the appearance may differ depending on
the product, and the specifications are subject to
change without prior notice to improve the performance.
BN46-00424A-16