Samsung SL-C460FW User Manual Ver.1.0 (English) - Page 149

Installing driver over the network • Some features and optional goods may not be available depending on model or country (see "Features by models" on page 7). • The machine that does not support the network interface, it will not be able to use this feature (see "Rear view" on page 23). • You can install the printer driver and software when you insert the software CD into your CD-ROM drive. For windows, select the printer driver and software in the Select Software to Install window. 5 Follow the instructions in the installation window. Silent installation Mode Silent installation mode is an installation method that does not require any user intervention. Once you start the installation, the machine driver and software are automatically installed on you computer. You can start the silent installation by typing /s or /S in the command window. 6 Windows Command-line Parameters Following table shows commands that can be used in the command window. The firewall software might be blocking network communication. Before connecting the device to the network, disable the computer's firewall. Following command-line are effective and operated when command is used with /s or /S. But /h, /H or /? are exceptional commands that can be operated solely. 1 Make sure that the machine is connected to the network and powered on. Also, your machine's IP address should have been set (see "Setting IP address" on page 146). 2 Insert the supplied software CD into your CD-ROM drive. 3 Review and accept the installation agreements in the installation window. Then, click Next. 4 Select Network Connection on the Printer Connection Type screen. Command- line /s or /S Definition Starts silent installation. Description Installs machine drivers without prompting any UIs or user intervention. 2. Using a Network-Connected Machine 149