Samsung SL-C460FW User Manual Ver.1.0 (English) - Page 172

Wireless network setup Before entering the IP address for the machine, you must know the computer's network configuration information. If the computer's network configuration is set to DHCP, the wireless network setting should also be DHCP. Likewise, if the computer's network configuration is set to Static, the wireless network setting should also be Static. If your computer is set to DHCP and you want to use the Static wireless network setting, you must contact the network administrator to get the static IP address. • For the DHCP method If the IP address assignment method is DHCP, check if DHCP is shown in the Wireless Network Setting Confirm window. If it shows Static, click Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP). • For the Static method If the IP address assignment method is Static, check if Static is shown in the Wireless Network Setting Confirm window. If it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine. For example, If the computer's network information is as shown follows: - IP address: 169.254.133.42 - Subnet Mask: 255.255.0.0 Then, the machine's network information should be as below: - IP address: 169.254.133.43 - Subnet Mask: 255.255.0.0 (Use the computer's subnet mask.) - Gateway: 169.254.133.1 9 The Wireless Network Setting Complete window appears. Click Next. 10 When the wireless network settings are completed, disconnect the USB cable between the computer and machine. Click Next. 11 Follow the instructions in the installation window. 16 Setup using Mac Access point via USB cable Items to prepare • Access point • Network-connected printer • Software CD that was provided with your machine • A machine installed with a wireless network interface • USB cable 2. Using a Network-Connected Machine 172