Samsung SNP-3371TH User Manual - Page 48

network connection and setup 3. In the pane, provide the necessary information. • MAC (Ethernet) Address : The MAC (Ethernet) address of the applicable camera will be set automatically so you don't need to input it manually. M  You can configure the static IP settings only if the DHCP checkbox is unchecked. If using a Broadband Router • IP Address : Enter an address falling in the IP range provided by the Broadband Router. ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 • Subnet Mask : The of the Broadband Router will be the of the camera. • Gateway : The of the Broadband Router will be the of the camera. M  The settings may differ depending on the connected Broadband Router model. For more information, refer to the user manual of the applicable router.  Refer to the "Port Range Forward (Port Mapping) Setup" section of the Broadband Router's documentation. (Page 51) If not using a Broadband Router For setting , , and , contact your network administrator. 4. In the pane, provide necessary information. • HTTP Port : Used to access the camera using the Internet browser, defaulted to 80. Use the spin button to change the HTTP Port value. • VNP Port : Used to control the video signal transfer, defaulted to 4520. 5. Enter the password. This is the login password for the "admin" user who accesses the camera. The default password is "4321". 48_ network connection and setup