Samsung SNP-3371TH User Manual - Page 52
Setting up Port Range Forward for several network cameras
View all Samsung SNP-3371TH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
network connection and setup Setting up Port Range Forward for several network cameras When several network cameras are connected to one Broadband Router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera. J If you don't set properly the TCP 943 port of the router, you cannot get any video stream from the web page of the camera. • TCP 943 port is a port for the Silverlight policy server of a camera. When Camera1 and Camera2 are connected to a router : User Ù Internet Ú Camera1 (192.168.1.100) Start Broadband Router End Protocol IP Address Ù Web Server Port VNP Port 8080 4520 943 943 TCP 192.168.1.100 RTSP Port 3000 3000 3000 TCP/UDP 192.168.1.100 Policy Server Port 943 3001 3001 TCP/UDP 192.168.1.101 4520 4520 TCP/UDP 192.168.1.100 Camera2 (192.168.1.101) 4521 8080 4521 8080 TCP/UDP TCP/UDP 192.168.1.101 Ù 192.168.1.100 Web Server Port VNP Port 8081 4521 8081 8081 TCP/UDP 192.168.1.101 RTSP Port 3001 Policy Server Port 943 • You can set a rule of Port Forwarding on the Broadband Router device through its configuration web page. • You cannot change the Silverlight policy server port of a camera. • You can change the ports of the camera except the policy server port through its configuration web pages. 52_ network connection and setup