Samsung SNP-3371TH User Manual - Page 88

VA / MD

Page 88 highlights

setup screen 5. Specify an operation that will perform if an alarm occurs. • Alarm output1 / Alarm output2 : Select whether to set the alarm output if an alarm is incoming, and specify the alarm output time. • E-mail sending : Specify the use of email transfer in the alarm input setup. • Record : Specify the use of recording in the alarm input setup. • Goto Preset : Moves to the specified preset location when setting the alarm input. 6. When done, click [Apply ( )]. VA / MD 1. From the Setup menu, select the tab. 2. Click . To set the Motion Detection 1. Select a motion detection mode. 2. Specify the use of motion detection. 3. Select a sensitivity level of the motion detection. The greater the level is, the lesser movement will be detected. 4. Place the cursor at a point in the video and drag it to whatever you need. 5. Specify whether or not the event area is displayed. - If you select , a portion of the selected area considered that an event occurred will be boxed in white. 6. Specify the object size. 7. Specify the activation time and activation condition.  For more information about and , refer to "Alarm input". (page 87) 8. When done, click [Apply ( )]. J  If you are controlling the Pan/Tilt/Zoom operation or fitting the focus of the camera, the motion sensor may not work. 88_ setup screen

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134

setup screen
88_
setup screen
5.
Specify an operation that will perform if an alarm occurs.
Alarm output1 / Alarm output2 : Select whether to set the alarm output if an alarm
is incoming, and specify the alarm output time.
E-mail sending : Specify the use of email transfer in the alarm input setup.
Record : Specify the use of recording in the alarm input setup.
Goto Preset : Moves to the specified preset location when setting the alarm input.
6.
When done, click [
Apply
(
)
].
VA / MD
1.
From the Setup menu, select the
<
Event (
)
> tab.
2.
Click <
VA / MD
>.
To set the Motion Detection
1.
Select a motion detection mode.
2.
Specify the use of motion detection.
3.
Select a sensitivity level of the motion
detection.
The greater the level is, the lesser
movement will be detected.
4.
Place the cursor at a point in the video
and drag it to whatever you need.
5.
Specify whether or not the event area is
displayed.
-
If you select <
On
>, a portion of the
selected area considered that an
event occurred will be boxed in white.
6.
Specify the object size.
7.
Specify the activation time and activation condition.
For more information about <
Activation time
> and <
Action
>, refer to “
Alarm input
”. (page 87)
8.
When done, click [
Apply
(
)
].
J
If you are controlling the Pan/Tilt/Zoom operation or fitting the focus of the camera, the motion
sensor may not work.