Samsung VY-H200 User Manual (user Manual) (ver.1.0) (English) - Page 8

Connecting to a PC Using the USB Cable 1 Connect the USB cable to the USB port on your PC. 2 Connect the opposite end of the USB cable to the USB cable port at the top of your Voice yepp. q The Power of yepp will automatically turn on. 3 The message 'Searching for new device' indicates the USB driver will be installed. The window showing the installation status may not appear. Check the 'Device Manager' to see if the installation has been completed correctly. USB Cable Record Hold Delete Speed Menu Repeat Folder OFF 4 Upon installation of the USB driver 'USB Mass Storage Device' will appear in the 'Device Manager'. q Connect it using the correct ends of the USB cable. 14 To Check the USB Driver q Windows 98/ME: Controller ➔ System ➔ Device Manager ➔ Universal Serial Bus Controller ➔ SAMSUNG VY-H200, YEPP USB Mass Storage Device q Windows 2000 (Professional version): Controller ➔ System ➔ Hardware ➔ Device Manager ➔ Universal Serial Bus Controller ➔ USB Mass Storage Device q Windows XP (Professional version): Controller ➔ System ➔ Hardware ➔ Device Manager ➔ Universal Serial Bus Controller ➔ USB Mass Storage Device (Windows XP version) 5 Please refer to 'Manual Installation of the USB Driver' if the USB driver has not been installed as above. q For WinXP, the following window will appear whenever you connect the USB cable to your Voice yepp. q Click [Cancel] to use the Voice yepp. 15