Sanyo DP26647A Owners Manual - Page 4

SPECIFICATIONS Power Requirement: Source: AC 120V, 60Hz AC Power Consumption (average): DP26647: 104 watts DP32647: 155 watts CAUTION: FCC Regulations state that improper modifications or unauthorized changes to this unit may void the user's authority to operate the unit. HANDLING PRECAUTIONS • Handle by the cabinet only. Never touch the screen when handling. • Excessive pressure on the screen can cause permanent discoloration or dark spots. • Handling damage is not covered under warranty. POSITIONING THE LCD DTV Always use an appropriate table or stand when positioning your DTV. Do not position the DTV in a confined area. Allow adequate space for proper ventilation. PROTECTING THE LCD DTV SCREEN The screen is likely to be damaged if it is not maintained properly. Do not use hard objects such as hard cloth or paper. Do not use excessive pressure when cleaning the screen; excessive pressure can cause permanent discoloration or dark spots. NEVER spray liquids on the screen. REMOVING THE DTV STAND (Optional) Tools Needed: Phillips screwdriver Important Note: Place DTV face down on a padded or cushioned surface to protect the screen and finish. 1 Remove four (4) screws from the metal bracket. CAUTION: Hold the stand firmly as you remove the last screw. 2 Carefully remove the DTV stand. Model DP26647 NOTE: All dimensions are in inches. Model DP32647 WALL MOUNTING (Optional) Use the threaded inserts on the back of your DTV to secure it using a wall mounting kit. VESA standard interface: DP26647: 100 x 100 DP32647: 200 x 200 Note: Wall Mounting kit is not supplied. DTV Back View Mounting screws measurements: DP26647-M4 Diameter, Length-10mm (maximum). DP32647-M6 Diameter, Length-12mm (maximum). 4 Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032