Sanyo DP26746 Owners Manual - Page 7

2 ANALOG RF ANTENNA CONNECTION • Connect a Cable signal (with or without a cable box) or RF antenna to the Analog RF input. The analog tuner in this DTV receives Analog Antenna signals, Analog Cable signals, or the RF output from a VCR or cable box. DTV Back DTV Back DTV Back VCR Back OR VCR Back OR VCR Back RF Antenna Analog Cable Analog Satellite Receiver CATV FRANCHISE NOTE: Cable companies, like public utilities, are franchised by local government authorities. To receive cable programs, even with equipment which is capable of receiving cable channels, the consumer must subscribe to the cable company's service. NOTES: If you do not have a VCR, connect signal directly to the 75 ohm terminal (UHF/ VHF/CATV). Don't be fooled by the phrase "Available in High-Definition." The only resolution available with any of these connections, regardless of the original content, is standard analog (SDTV). I DTV will select the correct Antenna mode for the type of Analog RF signal connected automatically. I Use "Analog Antenna Signal" in the Setup menu to change the Antenna Mode. I If you move the DTV to a new location, press the RESET key twice after connecting the signal and turning on the DTV. (Continued on page 8.) Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032 7