Sanyo EF60 Instruction Manual, PLC-EF60 - Page 42

Computer Adjustment Manual PC Adjust Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 50 independent memory areas to memorize those parameters adjusted manually. It allows you to recall the setting for a specific computer easily. 1 Press the MENU button to display On-Screen Menu. Spin the menu icons with the Control pad and press the SELECT button when the PC ADJ. icon comes right in front. 2 Move the yellow frame pointer with the Control pad to an item which you want to select. 3 Press the SELECT button to display an adjustment dialog box. Adjust value with the Control pad. PC Adjust Menu Move the yellow frame pointer to an item and press the SELECT button. Fine sync Eliminates flicker from the image displayed. Adjust value with the Control pad. (From 0 to 31) Total dots Adjusts the number of total dots in one horizontal period. Adjust number to match your PC image with the Control pad. Current mode Press the SELECT button to show H-Freq. and V-Freq. of the connected computer. Clamp Adjusts clamp level (Phase and Width). When the image has dark bars, try this adjustment. Display area Adjusts the resolution at the Display area dialog box. Horizontal Adjusts the horizontal area displayed by this projector. Decrease or increase value with the Control pad. Vertical Adjusts the vertical area displayed by this projector. Decrease or increase value with the Control pad. Adjust value with the Control pad. Current mode Press the SELECT button at the Current mode to show the information of the connected computer. 42