Sanyo EF60 Instruction Manual, PLC-EF60 - Page 67
Indicators and Projector Con..., Main Indicators
View all Sanyo EF60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Maintenance and Cleaning Indicators and Projector Condition Main Indicators Indicators READY Green WARNING TEMP Red LAMP Red Projector Condition The projector is OFF. (The AC power cord is unplugged.) The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed. The projector is ready to be turned on with the POWER ON-OFF button. Maintenance & Cleaning The projector is operating normally. The projector is in the Power management mode. The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough and the temperature returns to normal, the LAMP indicator lights red and the projector can be turned on. READY, WARNING TEMP, SHUTTER, WARNING FILTER, LAMP 1 REPLACE AND LAMP 2 REPLACE indicators are blinking all together. The projector has been cooled down enough and the temperature returns to normal. When turning on the projector, the WARNING TEMP indicator stops blinking. Check and clean the air filters. The projector detects an abnormal condition and cannot be turned on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, disconnect the AC power cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause electric shock or a fire hazard. LED Conditions: • • • Off • • • Lighting • • • Dim lighting • • • Blinking 67