Sanyo HD150 Owners Manual - Page 13

SERIAL PORT IN TERMINAL If you control a projector by computer, you must connect a cable (not provided) from your computer to this terminal. CONNECTING PROJECTOR USB PORT (Series B) This port is used to control a projector with computer. Connect USB port of computer to this port. INPUT 1 INPUT 2 INPUT 3 INPUT 4 SERIAL PORT OUT TERMINAL This terminal outputs signal from SERIAL PORT IN. More than two projectors can be controlled with one computer by connecting SERIAL PORT IN. of another projector to this terminal. SERIAL PORT IN SERIAL PORT OUT R/C JACK USB AUDIO OUT R L RESET (MONO) SDI IN1 SDI IN2 SDI OUT R/Pr G/Y B/Pb H/HV V AUDIO R L CONTROL PORT (MONO) DVI AUDIO CONTROL PORT R L (MONO) R/C JACK When using Wired / Wireless Remote Control Unit as Wired Remote Control, Connect Wired Remote Control Unit to this jack with Remote Control Cable (supplied). (Refer to page 18.) RESET BUTTON This projector uses a micro processor to control unit. Occasionally, micro processor may malfunction and need to be reset. This can be done by pressing RESET button with a pen, which will shut down and restart unit. Do not use RESET function excessively. AUDIO OUTPUT JACKS Connect an external audio amplifier to these jacks. (Refer to P14, 15.) 13